Longitudinal Force Distribution of CWR on Long-span Arch Bridge
YAN Bin,FU Hexin,YU Limei,WANG Weidong
DOI: https://doi.org/10.3969/j.issn.1001-8360.2023.03.002
2023-01-01
Abstract:With the increasingly wide use of arch bridges in China’s high-speed railway, the longitudinal force distribution law of continuously welded rails on different forms of large-span arch bridges still needs to be explored. Four different forms of arch bridges, namely, 112 m lift arch bridge, 140 m steel box tied-arch bridge,（24+160+24）m tied-arch bridge, and（52+382+52）m steel box arch bridge, were used as examples to establish refined simulation models of arch bridge-track system considering track, beam, suspender and arch rib. The influence of the rail expansion joint on the longitudinal force was analyzed. The interaction law between the large-span arch bridge and the track under the effect of complex temperature, vertical live load, train braking and earthquake was revealed. The influence of loading-history on the force characteristics of the arch bridge-track system was explored. The results show that the installation of a rail expansion joint at the end of the beam can effectively reduce the rail stress as the extreme value of rail stress appears near the beam ends under the action of temperature load, vertical live load, train braking, and longitudinal earthquake. Compared with the flexural force and braking force, the expansion force caused by the temperature change of the beam is the main controlling load, and the temperature change of the suspender and arch rib has little effect on the longitudinal force of the rail on the arch bridge. The extreme value of the stress of the rails near the end of the beam under the action of earthquake reaches 635.5 MPa. When checking the horizontal force at the top of the pier, the analysis method considering the influence of loading-history should be used for safer calculation results.