Abstract:An orthotropic steel deck (OSD) has a complicated structure, and its fatigue life is mainly determined by various welding details. Fatigue assessment of deck-to-rib welded joints under long-term train loads is an important concern for engineers. Using the stress range–number of cycles (S-N) curves that are recommended by existing specifications, it is difficult to consider welding residual stress. As a type of initial stress, welding residual stress reduces structural fatigue life by influencing the mean stress of the external cyclic load. However, the effect of mean stress is often overlooked by traditional welding fatigue theory. In this paper, a full-range S-N curve model of steel fatigue resistance integrating welding residual stress is proposed by adopting the Soderberg formula to equivalently transform the stress amplitude and mean stress. The Nanjing Dashengguan Bridge, a six-line railway steel arch bridge and the longest steel arch bridge in the world, is used as an example to demonstrate the fatigue life evaluation procedure of the proposed model in detail. First, the distribution of the welding residual stress of deck-to-rib welded details is obtained based on a refined finite-element model (FEM), and its accuracy is verified experimentally. Second, the partial welded joint model is embedded into the whole multiscale FEM of the steel deck. The structural/real stress spectrum of the welded details under a passenger/freight train is obtained by integrating the coupling effect of the train load stress and residual stress. Finally, fatigue life evaluation of the deck-to-rib welded details of the Dashengguan Bridge is carried out based on the proposed S-N curve model, integrating the residual stress and annual train volume. The results show that (1) the longitudinal residual stress (σZ) on the top and bottom surfaces of the deck vary with its welding direction respectively (perpendicular or parallel); (2) the maximum value of the real stress under the coupling effect of train load stress and residual stress is less than the yield strength (fy), so the influence of mean stress on the fatigue life of welded joints should still be considered; and (3) the fatigue life calculated by the proposed model is more accurate and conservative than a common standard. In summary, the proposed model provides a basis for determining whether the Dashengguan Bridge can allow freight trains to pass.

Additional forces on continuously welded rails of a long-span high-speed railway suspension bridge under single effect and multiple effects: A case study

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Effect of Rail Restraints on Seismic Responses of Cushioning Railway Bridges

Mechanical Properties and Structural Optimization of Continuous Welded Rail on Super-Long-Span Suspension Bridges for High-Speed Railway

Dynamic analysis of train and bridge in crosswinds based on a coupled wind-train-track-bridge model

Force Analysis of CRTS II Slab Track on Long Span Bridge under Damage Conditions

Dynamic Response Analysis of Long-Span Continuous Bridge Considering the Effect of Train Speeds and Earthquakes

Mechanical deformation Properties of Continuous Welded Rail on Kilometer-Span Suspension Bridge for High-speed Railway

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Analysis of Longitudinally Connected Ballastless Track on the High-speed Railway Long-span Bridge Based on the Actual Measured Temperature

Train–Bridge Coupled Vibration of a Long-Span Steel Truss Suspension Bridge Under Complex Driving Conditions

Numerical Analysis of the Influence of Prestressed Steel Wires on Vehicle-Bridge Coupling Vibration of Simply Supported Beams on High-Speed Railway

Appropriate locations of fixed bearings of continuous beams considering rail-bridge thermal interaction

Investigation of longitudinal movements of girder ends considering various longitudinal non-linear resistances in railway suspension bridges

Dynamic Response of a Long-Span Concrete-Filled Steel Tube Tied Arch Bridge and the Riding Comfort of Monorail Trains

Research on fatigue failure and structural measures of suspenders in the Jinsha River railway suspension bridge

Numerical Analysis and Photoelastic Experiment for the Joint Structure in the Rigid Frame Bridge with Continuous Beam

Fatigue Life Evaluation of Welded Joints in OSD for Railway Bridges Considering Welding Residual Stress

Fatigue Characteristics of Long-Span Bridge-Double Block Ballastless Track System

Study on the influence of damage characteristics of longitudinal ballastless track on the dynamic performance of train-track-bridge coupled systems