Abstract:Carbon-based composite materials, denoted as C/C composites and possessing high thermal conductivity, were synthesized utilizing a three-dimensional (3D) preform methodology. This involved the orthogonal weaving of mesophase pitch-based fibers in an X (Y) direction derived from low-temperature carbonization, and commercial PAN-based carbon fibers in a Z direction. The 3D preforms were saturated with mesophase pitch in their raw state through a hot-pressing process, which was executed under relatively low pressure at a predetermined temperature. Further densification was achieved by successive stages of mesophase pitch impregnation (MPI), followed by impregnation with coal pitch under high pressure (IPI). The microstructure and thermal conductivity of the C/C composites were systematically examined using a suite of analytical techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and PLM, amongst others. The findings suggest that the volumetric fraction of fibers and the directional alignment of the mesophase pitch molecules can be enhanced via hot pressing. The high graphitization degree of the mesophase pitch matrix results in an increased microcrystalline size and thus improved thermal conductivity of the C/C composite. Conversely, the orientation of the medium-temperature coal pitch matrix is relatively low, which compensates for the structural inadequacies of the composite material, albeit contributing minimally to the thermal conductivity of the resultant C/C composites. Following several stages of impregnation with mesophase pitch and subsequent impregnation with medium-temperature coal pitch, the 3D C/C composites yielded a density of 1.83 and 2.02 g/cm3. The thermal conductivity in the X (Y) direction was found to be 358 and 400 W/(m·K), respectively.

Effects of a natural flake graphite addition to mesophase pitch on the structure and properties of unidirectional C/C composites

Effects Of Heat-Treatment Temperature And Binder Content On The Microstructure And Thermal Conductivity Of Graphite Flake-Carbon Composites

Experiments and Modeling for Thermal Conductivity of Graphite Nanoplatelets/carbon Composites

Effect of Graphite Flakes Particle Sizes on the Microstructure and Properties of Graphite Flakes/copper Composites

Experiments and Modeling of Thermal Conductivity of Flake Graphite/polymer Composites Affected by Adding Carbon-Based Nano-Fillers

Preparation and thermal conduction property of expanded graphite matrix composites

Binding Natural Graphite with Mesophase Pitch: A Promising Route to Future Carbon Blocks

Thermal Conductivity and Mechanical Properties of a Flake Graphite/cu Composite with a Silicon Nano-Layer on a Graphite Surface

Analysis of transverse thermal conductivity for mesophase pitch-based carbon fibers and the through-thickness heat conduction of their composites

Significant Enhancement of Thermal Conductivity in Graphite/polyester Composite Via Interfacial Π–π Interaction

Microstructure and mechanical properties of carbon graphite composites reinforced by carbon nanofibers

Preparation and Characterization of Large Diameter Pitchbased Carbon Fiber/abs Resin Composites with High Thermal Conductivities

In-Situ Doping B4C Nanoparticles in Mesophase Pitch for Preparing Carbon Fibers with High Thermal Conductivity by Boron Catalytic Graphitization

Microstructure and properties of graphite nanoflakes/Cu matrix composites fabricated by pressureless sintering and subsequent thermo-mechanical treatment

Thermal conductivity and mechanical properties of graphite/Mg composite with a super-nano CaCO3 interfacial layer

Mechanical and thermal conduction properties of carbon/carbon composites with different carbon matrix microstructures

Carbon Blocks from Natural Flake Graphite and Mesophase Pitch: Fabrication Processing, Microstructre, Mechanical Property, and Electrical Perfromance

The positive role of mesophase-pitch-based carbon fibers in enhancing thermal response behavior in Carbon/Carbon composites

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Graphite Blocks with Preferred Orientation and High Thermal Conductivity

Modeling the In-Plane Thermal Conductivity of a Graphite/polymer Composite Sheet with a Very High Content of Natural Flake Graphite