Abstract:Carbon-based composite materials, denoted as C/C composites and possessing high thermal conductivity, were synthesized utilizing a three-dimensional (3D) preform methodology. This involved the orthogonal weaving of mesophase pitch-based fibers in an X (Y) direction derived from low-temperature carbonization, and commercial PAN-based carbon fibers in a Z direction. The 3D preforms were saturated with mesophase pitch in their raw state through a hot-pressing process, which was executed under relatively low pressure at a predetermined temperature. Further densification was achieved by successive stages of mesophase pitch impregnation (MPI), followed by impregnation with coal pitch under high pressure (IPI). The microstructure and thermal conductivity of the C/C composites were systematically examined using a suite of analytical techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and PLM, amongst others. The findings suggest that the volumetric fraction of fibers and the directional alignment of the mesophase pitch molecules can be enhanced via hot pressing. The high graphitization degree of the mesophase pitch matrix results in an increased microcrystalline size and thus improved thermal conductivity of the C/C composite. Conversely, the orientation of the medium-temperature coal pitch matrix is relatively low, which compensates for the structural inadequacies of the composite material, albeit contributing minimally to the thermal conductivity of the resultant C/C composites. Following several stages of impregnation with mesophase pitch and subsequent impregnation with medium-temperature coal pitch, the 3D C/C composites yielded a density of 1.83 and 2.02 g/cm3. The thermal conductivity in the X (Y) direction was found to be 358 and 400 W/(m·K), respectively.

Preparation and thermal conduction property of expanded graphite matrix composites

Preparation and Properties of Polypropylene/Graphite Composites with High Thermal Conductivity

Thermal conductivity of high density polyethylene filled with graphite

Experiments and Modeling for Thermal Conductivity of Graphite Nanoplatelets/carbon Composites

Preparation and Characterization of Large Diameter Pitchbased Carbon Fiber/abs Resin Composites with High Thermal Conductivities

Expansion Process and Thermal Conductivity Performance of the Graphite Used As the Heat and Mass Transfer Intensification Material

Significant Enhancement of Thermal Conductivity in Graphite/polyester Composite Via Interfacial Π–π Interaction

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Effects Of Heat-Treatment Temperature And Binder Content On The Microstructure And Thermal Conductivity Of Graphite Flake-Carbon Composites

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

Preparation and its thermal properties of graphite flakes/Al composites by pressure infiltration method

Copper–graphite composites: Cross-property connections between electrical conductivity and thermal expansion coefficient for 0–90 vol% of graphite

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Mechanical and thermal conduction properties of carbon/carbon composites with different carbon matrix microstructures

Research on Graphite/Carbon Fibre/Polypropylene Composites with High Strength and Heat Conductivity

Fabrication, mechanical and thermal properties of tungsten-copper coated graphite flakes reinforced copper matrix composites

Thermal and Mechanical Properties of Expanded Graphite/Paraffin Gypsum-Based Composite Material Reinforced by Carbon Fiber

Structure and Thermal Expansion of Cu-90 vol. % Graphite Composites

Mechanical properties and thermal conductivity of lightweight and high-strength carbon-graphite thermal insulation materials

Effect of Graphite Flakes Particle Sizes on the Microstructure and Properties of Graphite Flakes/copper Composites

Fabrication and Thermal Properties of Hot Press Sintered Cr-coated Carbon Fiber/cu Composites