Abstract:The use of functional polymeric composites with superior thermal properties, capable of replacing conventional polymers, has increased in recent years, particularly in the electrical‐electronics sector where thermal management is crucial. Carbon fiber polymer–matrix structural composites have relatively high in‐plane thermal conductivity but low through‐plane conductivity. In order to further enhance the through‐plane and in‐plane conductivity of carbon fiber (CF)‐reinforced polybutylene terephthalate (PBT) composite, a hybrid loading approach was employed, incorporating synthetic graphite (SG), boron nitride (HBN), aluminum nitride (AlN), and graphene (G) in composite formulations. It was obtained that the in‐plane conductivity values of PBT‐20CF‐20SG‐3G and the through‐plane conductivity of PBT‐20CF‐20SG‐3AlN are 69% and 25% higher than those of PBT‐40CF, respectively. However, the mechanical properties of hybrid composites exhibit lower values compared to those of CF‐reinforced PBT composites. The tensile strength value of PBT‐40CF is about 33% and 57% higher than that of PBT‐20CF‐20SG‐3G and PBT‐20CF‐20SG‐3AlN. Moreover, the flexural strength of PBT‐40CF is about 48% and 38% higher than that of PBT‐20CF‐20SG‐3G and PBT‐20CF‐20SG‐3AlN, respectively. The density value of PBT‐40CF is lower than that of the composites of PBT‐20CF‐20SG. From thermogravimetric analysis (TGA) analysis it was observed that the thermal stability of PBT‐40CF is comparable to that of the composites PBT‐20CF‐20SG. From the conducted study, it can be proposed that the hybrid combination of SG, HBN, AlN, and G can be utilized to achieve higher thermal conductivity values, as opposed to relying solely on CF in the composites. This article is protected by copyright. All rights reserved.

Thermally Conductive Polypropylene/Graphite/Carbon Fiber Composites

Composites of Polypropylene Reinforced with Ultrafine Bamboo-char: Morphology, Mechanical and Thermal Properties

Preparation and Properties of Polypropylene/Graphite Composites with High Thermal Conductivity

Fabrication of High-Performance PP/Graphene Nanocomposites Via Friedel–Crafts

Enhanced thermal conductivity of PP hybrid films induced by filler orientation and laminated structure

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Research on Graphite/Carbon Fibre/Polypropylene Composites with High Strength and Heat Conductivity

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

Graphite films/carbon fiber fabric/polyurethane composites with ultrahigh in-plane thermal conductivity and enhanced mechanical properties

Preparation and Research of Thermally Conductive PBT/CF Composites

Significant Enhancement of Thermal Conductivity in Graphite/polyester Composite Via Interfacial Π–π Interaction

Preparation of CNTs/PP@Gr composites with a segregated structure and enhanced electrical and thermal conductive properties by the Pickering emulsion method

The Effect of Hybrid Thermal Fillers on Thermal Conductivity of Carbon Fiber Reinforced Polybutylene Terephthalate Composites

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

Preparation of polypropylene-based thermally conductive composites via multiple injection compression molding method

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Graphene at Different Scales to Synergistically Optimize the Thermal and Mechanical Properties of CF/PPBESK Composites

The thermal conductivity of 3D network reinforced polypropylene matrix composites was constructed by the pickering‐like emulsion method

Effect of carbon black on improving thermal stability, flame retardancy and electrical conductivity of polypropylene/carbon fiber composites

Preparation of flexible, highly conductive polymer composite films based on double percolation structures and synergistic dispersion effect