Abstract:Thermally conductive but electrically insulating polymer composites have drawn much attention in various applications including thermal management, electronic packing, etc. Herein, a facile method of preparing polymer composites with both excellent thermal conductivity and electrical insulation is reported. To do this, nylon 6 (PA6)/Graphene nanoplatelets (GNPs) composites were firstly prepared via melt blending, then smashed into micron particles and coated with hexagonal boron nitride (h-BN) powder via VAE resin, finally hot compress molding to form composites. Thus depending on the content of GNPs inside PA6 particles and the content of h-BN coated on the particles, the thermal and electrical conductivity of the composites could be well controlled. For instance, at the total content of fillers is 18.82 vol%, with 1.97 vol% GNPs insides PA particles and 16.85 vol% h-BN coated on the surface, almost ten times improvement of thermal conductivity (from 0.29 to 2.69 W m−1k−1) has been achieved, while still maintain an excellent electrical insulating (as low as 4.13 × 10−9 S/m). It is proposed that this double segregated filler network could provide synergistic enhancement for the thermal conductivity, while the electrical conductivity caused by GNPs could be largely cut off by h-BN filler network. More importantly, this unique structure could be well preserved even after the sample thickness was decreased into a thin film, resulting in a further increase of thermal conductivity (up to 8.96 W m−1k−1) in the flow direction. Since various thermoplastic polymers can be chosen as matrix, and different filler combination can be adopted to construct thermal conductive synergistic and electrical insulating, we believe that this work provides a facial method to fabricate highly thermally conductive composites with a low electrical conductivity.

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

The thermal conductivity of 3D network reinforced polypropylene matrix composites was constructed by the pickering‐like emulsion method

Preparation of highly thermally conductive but electrically insulating composites by constructing a segregated double network in polymer composites

Enhanced Thermal Conductivity and Balanced Mechanical Performance of PP/BN Composites with 1 vol% Finely Dispersed MWCNTs Assisted by OBC

Thermal conductive nylon 6 composites using hybrid fillers to construct a three‐dimensional thermal conductive network

Thermally Conductive Polypropylene/Graphite/Carbon Fiber Composites

Enhanced thermal conductivity and electrically insulating of polymer composites

Enhanced thermal conduction of hybrid filler/polydimethylsiloxane composites via a continuous spatial confining process

Highly Thermally Conductive and Flexible Nanocomposites Prepared by Integrating 1D/2D Polyethyleneimine-Modified Boron Nitride

Enhanced Thermal Conductivity in Polyamide 6 Composites Based on the Compatibilization Effect of Polyether-Grafted Graphene

Achieving a 3D Thermally Conductive while Electrically Insulating Network in Polybenzoxazine with a Novel Hybrid Filler Composed of Boron Nitride and Carbon Nanotubes

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

Constructing Highly Thermally Conductive Polystyrene-Based Composites by Introducing Multi-Walled Carbon Nanotubes into Melamine Foam-Supported Boron Nitride Network

A double mixing process to greatly enhance thermal conductivity of graphene filled polyamide 6 composites

Enhanced Thermal Conductivity of High-Density Polyethylene Composites with Hybrid Fillers of Flaky and Spherical Boron Nitride Particles

Thermal Conductive Composites Reinforced Via Advanced Boron Nitride Nanomaterials

Enhanced in-plane thermal conductivity of PP composites with high orientation and rational layered distribution of BNNS

Thermal Conductivity Enhancement of Polymeric Composites Using Hexagonal Boron Nitride: Design Strategies and Challenges

Enhanced the Thermal Conductivity of Polydimethylsiloxane via a Three-Dimensional Hybrid Boron Nitride@Silver Nanowires Thermal Network Filler

Design of a ternary synergistic network of HDPE/BN/CNT composites with an aligned shish-kebab structure for enhanced thermal conductivity and tensile strength