Abstract:Polyimide (PI) is an essential substrate or packaging material for various electronic devices. The decreased packaging size and high integration in electronic systems have caused the issue of heat accumulation issue. However, the intrinsic low thermal conductivity of PI cannot meet the requirements of certain electronic systems. Herein, we report a facile and effective approach to fabricating highly thermally conductive polyimide (PI)-based composites by constructing 3D nanofiller segregated networks in the matrix and realizing reduced interfacial thermal resistance between adjacent nanofillers. First, a water-soluble poly(amic acid) tertiary amine salt was utilized as a surfactant to facilitate the dispersion of hydrophobic boron nitride nanosheets (BNNS) in aqueous phase. Then, a combination of the ice-templating strategy and a hot-pressing treatment was applied to control the oriented distribution of BNNS, and the silver nanowires (AgNW) were incorporated and acted as "thermally conductive bridges", resulting in an obvious decrease of thermal interfacial resistance and forming an interconnected thermally conductive expressway. Thus, a significant improvement in the thermal conductivity was achieved. The resultant nanocomposite with 20 wt% BNNS-AgNW exhibited an in-plane thermal conductivity of 4.75 W m−1 K−1, corresponding to a thermal conductivity enhancement of 324%, which is much superior to those of the pure PI and the random distribution composites. These nanocomposites present an excellent electrically insulation property and good dielectric behavior as well as improved dimensional stability. This facile methodology is believed to afford PI-based materials broad application potential used as thermal interface materials in next generation electronic devices.

Enhanced in-plane thermal conductivity of PP composites with high orientation and rational layered distribution of BNNS

Mille-Feuille Inspired Thermally Conductive Polymer Nanocomposites with Overlapping BN Nanosheets for Thermal Management Applications.

Polymer‐based nanocomposites with ultra‐high in‐plane thermal conductivity via highly oriented boron nitride nanosheets

The thermal conductivity of 3D network reinforced polypropylene matrix composites was constructed by the pickering‐like emulsion method

Enhanced thermal conductivity and electrically insulating of polymer composites

Enhancement of thermal conductivity of BN-Ni/epoxy resin composites through the orientation of BN-Ni fillers by magnetic field and hot-pressing

Boron nitride self-assembly cladding structure promoting thermal property and dimensional stability of polymer composites

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Hot-pressing induced orientation of boron nitride in polycarbonate composites with enhanced thermal conductivity

Preparation of highly thermally conductive and electrically insulating PI/BNNSs nanocomposites by hot-pressing self-assembled PI/BNNSs microspheres

Simple and Consecutive Melt Extrusion Method to Fabricate Thermally Conductive Composites with Highly Oriented Boron Nitrides

Enhanced Thermal Conductivity and Balanced Mechanical Performance of PP/BN Composites with 1 vol% Finely Dispersed MWCNTs Assisted by OBC

Aqueous solution‐assisted in‐situ polymerization for fabrication of BNNS/PA12T nanocomposites with excellent thermal conductivity and mechanical properties

Enhanced thermal conductivity of PP hybrid films induced by filler orientation and laminated structure

Largely improved thermal conductivity of PI/BNNS nanocomposites obtained by constructing a 3D BNNS network and filling it with AgNW as the thermally conductive bridges

Improved out-of-plane thermal conductivity of boron nitride nanosheets filled polyamide 6/polyethylene terephthalate composites by rapid solidification method

Thermal Conductivity Enhancement of PLA/TPU/BN Composites by Controlling BN Distribution and Annealing Treatment

Hot-pressing Induced Alignment of Boron Nitride in Polyurethane for Composite Films with Thermal Conductivity over 50 Wm−1 K−1

One-step alkyl-modification on boron nitride nanosheets for polypropylene nanocomposites with enhanced thermal conductivity and ultra-low dielectric loss

Polymer composites with enhanced thermal conductivity via oriented boron nitride and alumina hybrid fillers assisted by 3-D printing

Thermal Conductive Composites Reinforced Via Advanced Boron Nitride Nanomaterials