Abstract:It is a traditional method to improve the thermal conductivity of matrix by adding fillers. However, it is a great challenge to construct a dense heat conduction network in composite material. The current researches on building thermal conductive network is to combine different fillers through structure design for achieving high thermal conductivity with the lowest possible filler content. Due to the electrical insulation requirements of electronic equipment, hexagonal boron nitride (h-BN) has been extensively studied as an inorganic thermal conductive filler. It has a layer structure that shows a relatively high TC of 300 W.m(-1).K-1 in the h-BN planar direction. In this study, the foam was introduced into the epoxy resin as a skeleton, and thermal conductive network was constructed by immersing the BN/E51 mixture into the foam. By comparing the hot deformation behavior of two kinds of foams with different structures and compositions: polyurethane foam (PF) and nano-melamine (melamine) foam (MF), epoxy resin-based composites with high thermal conductivity were obtained by hot press curing under the right compression ratio. PF has a large single arm size and good elastic deformation ability, but it is easy to become a barrier between BN, which is bad for forming thermal conductive path after compression. However, MF has a small single arm size and can be broken into four needle-like scaffold structures after compression. The needle-like scaffold structure promotes the good dispersion of BN, and finally forms a thermal path of BN throughout the material, which plays a key role in improving the thermal conductivity of the composite. As a result, MF-BN/E51 showed an excellent thermal conductivity of 3.88 W.m(-1).K-1 at 41 wt% BN load when the degree of hot pressing was 90%. It provides a new way for the composites to achieve a higher thermal conductivity with a less filler load.

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Construction of 3D boron nitride nanosheets/silver networks in epoxy-based composites with high thermal conductivity via in-situ sintering of silver nanoparticles

Polyurethane-templated 3D BN network for enhanced thermally conductive property of epoxy composites

Construction of three-dimensional interconnected boron nitride/sliver networks within epoxy composites for enhanced thermal conductivity

Construction of three-dimensional network using boron nitride microspheres and the thermal conductivity/stability of epoxy resin composites

Constructing Highly Thermally Conductive Polystyrene-Based Composites by Introducing Multi-Walled Carbon Nanotubes into Melamine Foam-Supported Boron Nitride Network

Three-dimensional skeleton assembled by carbon nanotubes/boron nitride as filler in epoxy for thermal management materials with high thermal conductivity and electrical insulation

Epoxy composite with significantly improved thermal conductivity by constructing a vertically aligned three-dimensional network of silicon carbide nanowires/ boron nitride nanosheets

Study on the Construction of 3D-BN Network in Epoxy Resin by Introducing Foam Skeleton

Enhance the thermal conductivity and maintain insulation property of epoxy via constructing a three-dimensional network by doping hexagonal boron nitride and carbon nanofiber

Preparation of Polymer Composites with High Thermal Conductivity by Constructing a “double Thermal Conductive Network” Via Electrostatic Spinning

A Novel Three-Dimensional Boron Phosphide Network for Thermal Management of Epoxy Composites

High thermal conductivity of epoxy composites via micro-zone enhanced 3D interconnected nickel skeleton

Improved thermal conductivity of epoxy composites filled with three-dimensional boron nitride ceramics-carbon hybrids

3D Vertically Aligned BNNS Network with Long-Range Continuous Channels for Achieving a Highly Thermally Conductive Composite.

Preparation of a 3D BN network structure by a salt‐template‐assisted method filled with epoxy resin to obtain high thermal conductivity nanocomposites

Thermal conductive nylon 6 composites using hybrid fillers to construct a three‐dimensional thermal conductive network

3D boron nitride foam filled epoxy composites with significantly enhanced thermal conductivity by a facial and scalable approach

Constructing three‐dimensional boron nitride network for highly thermally conductive epoxy resin composites

Ice-templated assembly strategy to construct three-dimensional thermally conductive networks of BN nanosheets and silver nanowires in polymer composites