Abstract:Surface modification of hexagonal boron nitride and construction of 3D thermal conductivity network and preparation of epoxy resin matrix composites. This paper investigates the high thermal conductive properties of modified hexagonal boron nitride (h‐BN)/epoxy (EP) composites. Octadecyl trimethyl ammonium bromide as a cationic surfactant modified h‐BN and sodium carboxymethylcellulose to build 3D heat transfer framework by the ice template method and preparation of epoxy composites. The h‐BN was modified by inter‐ionic charge electrostatic attraction to improve the h‐BN dispersibility; characterization by scanning electron microscope, transmission electron microscope, zeta potential, x‐ray diffraction and Fourier transform infrared spectroscopy proved the success of h‐BN surficial modifyment. 3 wt% sodium carboxymethylcellulose was used to construct the optimal 3D modified h‐BN network, and the w‐BN/EP composites had a very high heat conduction; when the composite material acquired by the ice template method have high heat transfer coefficient, 1.57 W/(m K) for 25 wt% 3D modified h‐BN/EP heat transfer coefficient and 0.76 W/(m K) for modified h‐BN/EP at the same ratio, which is a 107% enhancement in heat transfer efficiency, and 0.12 W/(m K) for EP, which is a 1208% enhancement in thermal conductivity. The results of thermogravimetric analysis (thermogravimetric analysis and differential thermogravimetric analysis), differential scanning calorimetry, and infrared thermography indicate that the thermostability and rejection of heat of composite material was significantly improved. The variation of dielectric constant was stabilized to ensure lower dielectric loss. Overall, this study can better adapt to high‐frequency signal transmission. Highlights Use octadecyl trimethyl ammonium bromide to modify the interface of hexagonal boron nitride (h‐BN) enhances the dispersibility and reduces the inter‐facial heat resistance with epoxy resin through inter‐ionic electrostatic attraction. The optimal content of sodium carboxymethyl cellulose was selected to construct a 3D mesh framework with the modified h‐BN to ensure the formation of a continuous and homogeneous network at the maximum porosity. The 3D modified h‐BN network was prepared by the ice template method to reinforce the heat conductivity of the composite materials.

Construction of three-dimensional interconnected boron nitride/sliver networks within epoxy composites for enhanced thermal conductivity

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

Construction of 3D boron nitride nanosheets/silver networks in epoxy-based composites with high thermal conductivity via in-situ sintering of silver nanoparticles

Constructing three‐dimensional boron nitride network for highly thermally conductive epoxy resin composites

Construction of three-dimensional network using boron nitride microspheres and the thermal conductivity/stability of epoxy resin composites

A Novel Three-Dimensional Boron Phosphide Network for Thermal Management of Epoxy Composites

High thermal conductivity of epoxy-based composites utilizing 3D porous boron nitride framework

High Thermal Conductivity and Low Dielectric Loss of Three-Dimensional Boron Nitride Nanosheets/Epoxy Composites

Polyurethane-templated 3D BN network for enhanced thermally conductive property of epoxy composites

An Efficient Approach for Constructing 3-D Boron Nitride Networks with Epoxy Composites to Form Materials with Enhanced Thermal, Dielectric, and Mechanical Properties

Preparation of a 3D BN network structure by a salt‐template‐assisted method filled with epoxy resin to obtain high thermal conductivity nanocomposites

Enhanced thermal conductive and mechanical properties of thermoresponsive polymeric composites: Influence of 3D interconnected boron nitride network supported by polyurethane@polydopamine skeleton

High Thermal Conductivity in Three-Dimensional BN/epoxy Composites by Engineered Favorable Interfacial Adhesion Between BN Sheets

Enhancing cryogenic thermal conductivity of epoxy composites through the incorporation of boron nitride nanosheets/nanodiamond aerogels prepared by directional‐freezing method

Boron nitride nanosheets synergized with two‐dimensional micron silver sheets to enhance thermal conductivity and insulation of epoxy resin composites

Preparation and Properties of Flexible Dual-Network High-Performance Epoxy Composites

Construction of 3D modified hexagonal boron nitride thermal conductivity network by ice template method and research of high heat‐conducting coefficient of epoxy resin matrix composite material

Silver Nanoparticle-Enhanced Three-Dimensional Boron Nitride/Reduced Graphene Oxide Skeletons for Improving Thermal Conductivity of Polymer Composites

Enhanced thermal conductivity of epoxy resin by incorporating three-dimensional boron nitride thermally conductive network.

Nanoarchitectonics of BN/AgNWs/Epoxy Composites with High Thermal Conductivity and Electrical Insulation