Abstract:In this study, silicon carbide (SiC) composites reinforced with pitch-based carbon fibers and composed of heat transfer channels were fabricated by combining chemical vapor infiltration and reactive melting infiltration method. It was observed that the internal heat conduction skeleton of pitch-based carbon fibers was sequentially formed. The thermal conductivities from room temperature to 500 °C along through-thickness direction and in-plane direction were investigated. The results showed that Cpf/SiC composites with heat transfer channels possessed excellent thermal conductvity in two directions, and the thermal conductivity increased with increasing volume content of heat transfer channels. The thermal conductivity in through-thickness direction reached 38.89 W/(m·K), and that for in-plane direction reached 112.42 W/(m·K). Theoretical calculations were empolyed to study the temperature dependence of the Cpf/SiC composites. The variations in slope A′ and intercept B′ values of fitted curves were in good agreement with the experimental results. To verify the reliablilty of the theoretical model, the Cpf/SiC composites were heated at 1650 °C for 2 h and the thermal conductivity exhibited further improvement due to the formation of more perfect crystalline structure. Thermal conductivity through thickness direction improved to 43.49 W/(m·K), and that in in-plane direction improved to 142.49 W/(m·K), which could be identified by the theoretical model. Finally, the leading edge model was established by using ABAQUS finite element analysis software to evaluate the potential application of the composites. Owing to the outstanding thermal conductivity, the leading edge obtained by using Cpf/SiC composites in this study exhibited lower temperature gradient and a more uniform temperature distribution. Moreover, less thermal stress and displacement were generated during heating process.

Analysis of transverse thermal conductivity for mesophase pitch-based carbon fibers and the through-thickness heat conduction of their composites

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

The positive role of mesophase-pitch-based carbon fibers in enhancing thermal response behavior in Carbon/Carbon composites

Microstructure of high thermal conductivity mesophase pitch-based carbon fibers

A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Simultaneous Measurements of Thermal Properties of Individual Carbon Fibers

Through-thickness thermal conductivity characterisation of dry carbon fibre fabric

Experimental study of the anisotropic thermal conductivity of 2D carbon-fiber/epoxy woven composites

The through-thickness thermal conductivity and heat transport mechanism of carbon fiber three-dimensional orthogonal woven fabric composite

Mechanical and thermal conduction properties of carbon/carbon composites with different carbon matrix microstructures

Hierarchical evaluation of effective thermal conductivities of needled composites

Temperature Dependence of the Thermal Conductivity of Individual Pitch-Derived Carbon Fibers

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

The Morphological Effect of Carbon Fibers on the Thermal Conductive Composites

Preparation and Characterization of Large Diameter Pitchbased Carbon Fiber/abs Resin Composites with High Thermal Conductivities

Effect of heat transfer channels on thermal conductivity of silicon carbide composites reinforced with pitch-based carbon fibers

Thermal Conductivity Enhancement of Carbon Fiber Composites

A Novel Multiscale Semi-Analytical Approach for Thermal Properties of Fuzzy Fiber Reinforced Composites

Enhanced thermal conductivity and isotropy of polymer composites by fabricating 3D network structure from carbon‐based materials