Abstract:Introducing nanotwins into materials is one of the important strengthening methods to achieve the synergistic improvement of strength and ductility. The anisotropic mechanical behaviors of nanotwinned materials have been widely studied by experimental and computational methods. The dominant deformation mechanisms about dislocation slippages can be effectively switched among three modes, and controlled by twin spacing and the angle between twin boundaries (TBs) orientation and loading direction. Particularly, most of previous researches mainly focused on the deformation mechanisms during the plastic flow stage and researchers paid little attention on the anisotropic characteristics of TBs at the elastic stage which are also essential to manufacture the high-performance materials. Therefore, this study is aiming to systemically investigate the anisotropic effect of TBs both on the elastic and plastic stages within the single crystalline or polycrystalline by molecular dynamics (MD) simulations. It is revealed that, when the loading direction is parallel to twin planes, the introduction of TBs in single crystalline models will significantly affect the characteristics of atomic bond rotation and elongation dominated elastic deformation, which can alter the Poisson's ratio of materials, generate elastic-softening behavior and inhomogeneous elastic deformation. At the plastic flow stage, the deformation mechanism transforms from trans-twin dislocation slippage into the coexistence of Hard Mode I and threading dislocation slippage (Hard Mode II) when the loading direction changes from parallel to perpendicular direction with respect to TBs. However, both the elastic and plastic behaviors are less sensitive to TBs in vertical direction. Moreover, the dislocation segments at the conjunction of trans-twin dislocation play a momentous role in enhancing material strength. The results for polycrystalline models are consistent with that of single crystalline ones. These findings are expected to be beneficial for the development of high-performance nanostructured materials for structural and functional applications by strain engineering and defect regulation.

MECHANICAL PROPERTIES OF CU WITH PREFERENTIALLY ORIENTATED NANOSCALE TWINS

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

In Situ Nanomechanical Testing of Twinned Metals in a Transmission Electron Microscope

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

Two softening stages in nanotwinned Cu

Computer Simulation of Strength and Ductility of Nanotwin-Strengthened Coarse-Grained Metals

Tuning the Strength-Ductility Synergy of Nanograined Cu Through Nanotwin Volume Fraction

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

Effects of twin orientation and spacing on the mechanical properties of Cu nanowires

Tensile behavior of columnar grained Cu with preferentially oriented nanoscale twins

Strengthening Mechanism of Ni–Cu Nanotwins with Void under Different Tensile Directions Based on Molecular Dynamics Simulation

Atomistic investigation on the anisotropic elastic and plastic responses of nanotwinned metals

Deformation Twinning Mechanism and Its Effects on the Mechanical Behaviors of Ultrafine Grained and Nanocrystalline Copper

Work Hardening of Polycrystalline Cu with Nanoscale Twins

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Deformation Twinning and Dislocation Processes in Nanotwinned Copper by Molecular Dynamics Simulations

Microstructure and Tensile Strength of Cu with Nano-Scale Twins

Effect of Twin Boundary Spacing on the Mechanical Properties of Nano-Columnar Crystalline Cu-Ni Alloy

Keynote: Mechanical Properties and Behaviors of Hierarchically Nanotwinned Materials under Indentation and Scratch

Hetero Interface and Twin Boundary Mediated Strengthening in Nano-Twinned Cu//Ag Multilayered Materials.

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings