Abstract:Hierarchical twin lamellae in polycrystalline face-centered cubic (fcc) metals possess a possibility to achieve higher strength with keeping an acceptable elongation. The present work is concerned with the analysis of twin spacing and grain size-dependent plastic performance in hierarchically nanotwinned fcc metals using a generalized strain-gradient plasticity model. The dislocation density-based physical model for constitutive description of nanotwinned fcc metals is expanded for the hierarchical structures of nanotwins. The strengthening mechanism and the failure behavior in these hierarchical nanostructures are studied to evaluate the strength and ductility. Moreover, the transition twin spacing between the strengthening and softening is obtained in different order of twin lamellae. A dislocation-based model on nucleating deformation twins is presented to predict the critical twin spacing in the lowest twin lamellae for generating the subordinate twin lamellae. Our simulation results demonstrate that the existence of the hierarchical nanotwins gives rise to a significant enhancement in the strength, and the resulting global flow stresses are sensitive to the twin spacings of the hierarchical twin lamellae and the grain size. Two softening stages are observed with variation of twin spacing, and the relevant transition twin spacing depends on the microstructural size in hierarchically nanotwinned metals. We further find that the predicted failure strain decreases with decreasing the twin spacing, which is quite different from the case of the individually nanotwinned fcc metals. The critical twin spacing for generating subordinate twins also depends on the twin spacing of superordinate twin lamellae and the grain size. These findings suggest that the high yield strength and good ductility can be achieved by optimizing the grain size and the twin spacings in the hierarchical twins.

Work Hardening of Polycrystalline Cu with Nanoscale Twins

Two softening stages in nanotwinned Cu

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

On the Role of Hierarchical Twins for Achieving Maximum Yield Strength in Nanotwinned Metals

Tuning the Strength-Ductility Synergy of Nanograined Cu Through Nanotwin Volume Fraction

Twin-size Effects on the Hardness and Plastic Deformation Mechanisms of Nanotwinned Diamond

Atomistic and Theoretical Insights on Nanoprecipitates-Controlled Strengthening Behavior for Optimum Mechanical Performance in Nanotwinned NiCoCr Alloys

Computer Simulation of Strength and Ductility of Nanotwin-Strengthened Coarse-Grained Metals

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

The Direct and Indirect Effects of Nanotwin Volume Fraction on the Strength and Ductility of Coarse-Grained Metals

In Situ Nanomechanical Testing of Twinned Metals in a Transmission Electron Microscope

Strong strain hardening in ultrafast melt-quenched nanocrystalline Cu: The role of fivefold twins

Intersectant Coherent Twin Boundaries Governed Strong Strain Hardening Behavior in Nanocrystalline Cu

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Delay of inverse Hall-Petch relationship of nanocrystalline Cu by modifying grain boundaries with coherent twins

Stabilizing defective coherent twin boundaries for strong and stable nanocrystalline nanotwinned Cu

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

Effect of De-Twinning on Tensile Strength of Nano-Twinned Cu Films

Dislocation re-emission induced staged work hardening in graphene-nanotwin reinforced Cu: A molecular dynamics simulation study

Atomistic Mechanisms of Fatigue in Nanotwinned Metals