Abstract:Recycling the end-of-life lithium-ion batteries including the lithium iron phosphate (LiFePO4) battery has been one of the most important technology areas since electric vehicles are gradually dominating the way of transportation. For the recycling of LiFePO4 batteries, the regeneration of pure iron phosphate dihydrate (FePO4∙2H2O) from spent cathode material is essential but difficult. The challenge is how to effectively synthesize battery-grade iron phosphate from the impurity-bearing acid solution by precipitation since the spent cathode powder usually holds various impurities. To avoid the introduction of impurities into the iron phosphate, a one-step spontaneous precipitation and phase transformation mode without acidity adjustment was preferred and studied in this work. The focus of this research included the process of phase transformation from amorphous to crystalline, and its effects on precipitation and the properties of the precipitate. It was interestingly found that there was an induction period for phase transformation from amorphous FePO4∙xH2O to monoclinic FePO4∙2H2O during the precipitation, which was distinctly shortened with the elevated temperature. Phase transformation led to fast increased precipitation efficiency, morphology evolution, and composition change, which benefited the consistency of iron phosphate. Phase transformation could be kinetically described by the JMA equation, with a rate-limiting step of materials diffusion towards the nucleation point and an activation energy of 20.4 kJ/mol. The critical crystal size for transformation was increasing along with the temperature's raising, which was ascribed to the changes in the volume energy and the surface energy. The results in this study have built the feasibility of chemically regenerating FePO4∙2H2O precursors from the spent cathode powder by precipitation purification in an acidic medium.

Study of Precursor Preparation of Battery-Grade Lithium Iron Phosphate

Research on Preparation of Nano-porous Lithium Iron Phosphate for Lithium-ion Battery Electrode Materials

Preparation of Nanoscale Iron (III) Phosphate by Using Ferro-Phosphorus as Raw Material

Recovery of Iron from Titanium White Waste for the Preparation of LiFePO4 Battery

Preparation of Iron Phosphate Battery Materials from Industrial Ferrous Sulfate Waste by Liquid Phase Method

Recovery of iron from titanium white waste for the preparation of LiFePO 4 battery

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

A novel environment-friendly synthesis of high purity micron iron phosphate and its application as a precursor of lithium iron phosphate

Preparation of Battery-Grade FePO4·2H2O Using the Stripping Solution Generated from Resource Recycling of Bauxite Residue

Wet-process phosphoric acid for preparation of iron phosphate and its influence on performance of lithium iron phosphate synthesis

Utilizing Titanium White Waste for LiFePO4 4 Battery Production: the Impact of Manganese Impurity

Effect of precursor FePO_4·2H_2O on electrochemical properties of LiFePO_4

Preparation of Precursor and Performance of LiFePO4

Preparation of Titanium Dioxide, Lithium Titanium Oxide and Lithium Iron Phosphate from Ilmenite

A versatile method for preparing FePO4 and study on its electrode performance in lithium ion batteries

A lithium ion battery positive electrode material for lithium phosphate and iron preparation

Preparation of battery-grade LiFePO4 by the precipitation method: a review of specific features

Utilizing titanium white waste for LiFePO4 battery production: The impact of manganese impurity

A facile way to regenerate FePO4∙2H2O precursor from spent lithium iron phosphate cathode powder: Spontaneous precipitation and phase transformation in an acidic medium

Clean and efficient synthesis of LiFePO4 cathode material using titanium white waste and calcium dihydrogen phosphate

Preparation of Fepo4 from Leaching Liquor of Fe-P Waste Slag and Its Application in Lithium Ions Batteries