Abstract:Recycling the end-of-life lithium-ion batteries including the lithium iron phosphate (LiFePO4) battery has been one of the most important technology areas since electric vehicles are gradually dominating the way of transportation. For the recycling of LiFePO4 batteries, the regeneration of pure iron phosphate dihydrate (FePO4∙2H2O) from spent cathode material is essential but difficult. The challenge is how to effectively synthesize battery-grade iron phosphate from the impurity-bearing acid solution by precipitation since the spent cathode powder usually holds various impurities. To avoid the introduction of impurities into the iron phosphate, a one-step spontaneous precipitation and phase transformation mode without acidity adjustment was preferred and studied in this work. The focus of this research included the process of phase transformation from amorphous to crystalline, and its effects on precipitation and the properties of the precipitate. It was interestingly found that there was an induction period for phase transformation from amorphous FePO4∙xH2O to monoclinic FePO4∙2H2O during the precipitation, which was distinctly shortened with the elevated temperature. Phase transformation led to fast increased precipitation efficiency, morphology evolution, and composition change, which benefited the consistency of iron phosphate. Phase transformation could be kinetically described by the JMA equation, with a rate-limiting step of materials diffusion towards the nucleation point and an activation energy of 20.4 kJ/mol. The critical crystal size for transformation was increasing along with the temperature's raising, which was ascribed to the changes in the volume energy and the surface energy. The results in this study have built the feasibility of chemically regenerating FePO4∙2H2O precursors from the spent cathode powder by precipitation purification in an acidic medium.

Utilizing titanium white waste for LiFePO 4 battery production: The impact of manganese impurity

Recovery of iron from titanium white waste for the preparation of LiFePO 4 battery

Clean and efficient synthesis of LiFePO4 cathode material using titanium white waste and calcium dihydrogen phosphate

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

Effect of Ti content on preparation of LiFePO4 cathode from FeSO4·7H2O waste residue

Waste to treasure: A sustainable technic to prepare high-performance lithium iron phosphate from laterite nickel tailings

Cleaner and effective recovery of metals and synthetic lithium-ion batteries from extracted vanadium residue through selective leaching

Sustainable Utilization of Fe(III) Isolated from Laterite Hydrochloric Acid Lixivium via Ultrasonic-Assisted Precipitation to Synthesize LiFePO4/C for Batteries

Preparation of Iron Phosphate Battery Materials from Industrial Ferrous Sulfate Waste by Liquid Phase Method

Basic Research on Selective Extraction of Iron from Titanium Dioxide Waste Acid to Prepare Iron Phosphate Precursors

A Sustainable Closed-Loop Process of Oxidation Leaching and Regeneration for Lithium Iron Phosphate Materials from Spent Batteries

A sustainable closed-loop method of selective oxidation leaching and regeneration for lithium iron phosphate cathode materials from spent batteries

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Preparation of Doped Iron Phosphate by Selective Precipitation of Iron from Titanium Dioxide Waste Acid

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

A Novel Strategy for Preparing Nano‐Sized and High‐Performance LiMnxFe1−xPO4 Cathode Materials from Discarded LiMn2O4 and LiFePO4 Electrode

A mild closed-loop process for lithium–iron separation and cathode materials regeneration from spent LiFePO 4 batteries

Recycling of LiFePO 4 cathode materials: From laboratory scale to industrial production

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

Preparation of Fepo4 from Leaching Liquor of Fe-P Waste Slag and Its Application in Lithium Ions Batteries

A facile way to regenerate FePO4∙2H2O precursor from spent lithium iron phosphate cathode powder: Spontaneous precipitation and phase transformation in an acidic medium