Abstract:With the widespread adoption of lithium iron phosphate (LiFePO4) batteries, the imperative recycling of LiFePO4 batteries waste presents formidable challenges in resource recovery, environmental preservation, and socio-economic advancement. Given the current overall lithium recovery rate in LiFePO4 batteries is below 1 %, there is a compelling demand for an eco-friendly, cost-efficient, and sustainable solution. This study introduces a green and sustainable recycling method that employs environmentally benign formic acid and readily available oxygen as reaction agents for selectively leaching lithium from discarded lithium iron phosphate powder. Formic acid was employed as the leaching agent, and oxygen served as the oxidizing agent. Utilizing a single-factor variable approach, various factors including formic acid concentration, oxygen flow rate, leaching time, liquid-to-solid ratio, and reaction temperature were individually investigated. Moreover, the feasibility of this method was explored mechanistically by analyzing E-pH diagrams of the Li-Fe-P-H2O system. Results demonstrate that under conditions of 2.5 mol/L formic acid concentration, 0.12 L/min oxygen flow rate, 25 mL/g liquid-to-solid ratio, 70 °C reaction temperature, and 3 h reaction time, lithium leaching efficiency exceeds 99.9 %, with iron leaching efficiency only at 1.7 %. Moreover, we also explored using air instead of oxygen as the oxidant and get the excellent lithium leaching rate (97.81 %) and low iron leaching rate (4.81 %), which shows the outstanding selectivity. Furthermore, the environmentally benign composition of the chemical reagents, comprising only C, H, and O elements, establishes it as a genuinely green and sustainable technology for secondary resource recovery. It can be considered as a highly environmentally friendly, cost-effective, and efficient approach. Nevertheless, in the current context of carbon neutrality and sustainable development, this method undoubtedly holds excellent prospects for industrialization.

A Sustainable Closed-Loop Process of Oxidation Leaching and Regeneration for Lithium Iron Phosphate Materials from Spent Batteries

A sustainable closed-loop method of selective oxidation leaching and regeneration for lithium iron phosphate cathode materials from spent batteries

A Mild Closed-Loop Process for Lithium–iron Separation and Cathode Materials Regeneration from Spent LiFePO4 Batteries

A mild closed-loop process for lithium–iron separation and cathode materials regeneration from spent LiFePO 4 batteries

Recycle of Spent LiFePO4 Batteries: an Eco-Friendly Closed-Loop Technique Based on Less Solvent Solid State Reaction

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

Selective leaching process for efficient and rapid recycling of spent lithium iron phosphate batteries

Integrated Recycling of Valuable Elements from Spent LiFePO4 Batteries: a Green Closed-Loop Process

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

A Clean and Sustainable Method for Recycling of Lithium from Spent Lithium Iron Phosphate Battery Powder by Using Formic Acid and Oxygen.

Enabling the Sustainable Recycling of LiFePO4 from Spent Lithium-Ion Batteries

Sustainable reprocessing of lithium iron phosphate batteries: A recovery approach using liquid-phase method at reduced temperature

A facile recycling and regeneration process for spent LiFePO 4 batteries

Closed-loop regeneration of LiFePO4 from spent lithium-ion batteries: A “feed three birds with one scone” strategy toward advanced cathode materials

Study on green closed-loop regeneration of waste lithium iron phosphate based on oxalic acid system

All-Component Recycling and Reuse Process for Spent LiFePO4 Cathodes

Selective Recovery of Lithium and Iron Phosphate/carbon from Spent Lithium Iron Phosphate Cathode Material by Anionic Membrane Slurry Electrolysis.

Process for recycle of spent lithium iron phosphate battery via a selective leaching-precipitation method

A Facile Recovery Process for Cathodes from Spent Lithium Iron Phosphate Batteries by Using Oxalic Acid

From Waste to Material Strategy: A Closed-Loop Regeneration Process of Spent Lifepo4 Batteries

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching