Abstract:Recycling the end-of-life lithium-ion batteries including the lithium iron phosphate (LiFePO4) battery has been one of the most important technology areas since electric vehicles are gradually dominating the way of transportation. For the recycling of LiFePO4 batteries, the regeneration of pure iron phosphate dihydrate (FePO4∙2H2O) from spent cathode material is essential but difficult. The challenge is how to effectively synthesize battery-grade iron phosphate from the impurity-bearing acid solution by precipitation since the spent cathode powder usually holds various impurities. To avoid the introduction of impurities into the iron phosphate, a one-step spontaneous precipitation and phase transformation mode without acidity adjustment was preferred and studied in this work. The focus of this research included the process of phase transformation from amorphous to crystalline, and its effects on precipitation and the properties of the precipitate. It was interestingly found that there was an induction period for phase transformation from amorphous FePO4∙xH2O to monoclinic FePO4∙2H2O during the precipitation, which was distinctly shortened with the elevated temperature. Phase transformation led to fast increased precipitation efficiency, morphology evolution, and composition change, which benefited the consistency of iron phosphate. Phase transformation could be kinetically described by the JMA equation, with a rate-limiting step of materials diffusion towards the nucleation point and an activation energy of 20.4 kJ/mol. The critical crystal size for transformation was increasing along with the temperature's raising, which was ascribed to the changes in the volume energy and the surface energy. The results in this study have built the feasibility of chemically regenerating FePO4∙2H2O precursors from the spent cathode powder by precipitation purification in an acidic medium.

Recovery of iron from titanium white waste for the preparation of LiFePO 4 battery

Utilizing titanium white waste for LiFePO 4 battery production: The impact of manganese impurity

Clean and efficient synthesis of LiFePO4 cathode material using titanium white waste and calcium dihydrogen phosphate

Cleaner and effective recovery of metals and synthetic lithium-ion batteries from extracted vanadium residue through selective leaching

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

Preparation of Iron Phosphate Battery Materials from Industrial Ferrous Sulfate Waste by Liquid Phase Method

Effect of Ti content on preparation of LiFePO4 cathode from FeSO4·7H2O waste residue

Recovery of Li2CO3 from Spent LiFePO4 by Using a Novel Impurity Elimination Process

Waste to treasure: A sustainable technic to prepare high-performance lithium iron phosphate from laterite nickel tailings

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

Recovery and regeneration of LiFePO4 from spent lithium-ion batteries via a novel pretreatment process

An entire recycling of spent Al-bearing cathode powder as giniite sphere and lithiophophate plate with leaching-hydrothermal-precipitation process

Sustainable Utilization of Fe(III) Isolated from Laterite Hydrochloric Acid Lixivium via Ultrasonic-Assisted Precipitation to Synthesize LiFePO4/C for Batteries

A facile way to regenerate FePO4∙2H2O precursor from spent lithium iron phosphate cathode powder: Spontaneous precipitation and phase transformation in an acidic medium

The recovery of high purity iron phosphate from the spent lithium extraction slag by a simple phosphoric acid pickling

Preparation of Battery-Grade FePO4·2H2O Using the Stripping Solution Generated from Resource Recycling of Bauxite Residue

A method for recovering Li3PO4 from spent lithium iron phosphate cathode material through high-temperature activation

Basic Research on Selective Extraction of Iron from Titanium Dioxide Waste Acid to Prepare Iron Phosphate Precursors

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

A dual-cycle regeneration to recover high-value and high-purity FePO4 from real wastewater for Li-battery application