Abstract:Recycling the end-of-life lithium-ion batteries including the lithium iron phosphate (LiFePO4) battery has been one of the most important technology areas since electric vehicles are gradually dominating the way of transportation. For the recycling of LiFePO4 batteries, the regeneration of pure iron phosphate dihydrate (FePO4∙2H2O) from spent cathode material is essential but difficult. The challenge is how to effectively synthesize battery-grade iron phosphate from the impurity-bearing acid solution by precipitation since the spent cathode powder usually holds various impurities. To avoid the introduction of impurities into the iron phosphate, a one-step spontaneous precipitation and phase transformation mode without acidity adjustment was preferred and studied in this work. The focus of this research included the process of phase transformation from amorphous to crystalline, and its effects on precipitation and the properties of the precipitate. It was interestingly found that there was an induction period for phase transformation from amorphous FePO4∙xH2O to monoclinic FePO4∙2H2O during the precipitation, which was distinctly shortened with the elevated temperature. Phase transformation led to fast increased precipitation efficiency, morphology evolution, and composition change, which benefited the consistency of iron phosphate. Phase transformation could be kinetically described by the JMA equation, with a rate-limiting step of materials diffusion towards the nucleation point and an activation energy of 20.4 kJ/mol. The critical crystal size for transformation was increasing along with the temperature's raising, which was ascribed to the changes in the volume energy and the surface energy. The results in this study have built the feasibility of chemically regenerating FePO4∙2H2O precursors from the spent cathode powder by precipitation purification in an acidic medium.

Preparation of Battery-Grade FePO4·2H2O Using the Stripping Solution Generated from Resource Recycling of Bauxite Residue

Synthesis of Battery-Grade FePO4·2H2O Using High-Pressure Hydrolyzed Precipitates of Cobalt-Iron Alloy Acid Solution.

Recovery of iron from titanium white waste for the preparation of LiFePO 4 battery

Preparation of Iron Phosphate Battery Materials from Industrial Ferrous Sulfate Waste by Liquid Phase Method

Synthesizing LiFePO4 by phosphate & iron recovered from sludge-incinerated ash and Li extracted from concentrated brines

A facile way to regenerate FePO4∙2H2O precursor from spent lithium iron phosphate cathode powder: Spontaneous precipitation and phase transformation in an acidic medium

Aluminum separation by sulfuric acid leaching-solvent extraction from Al-bearing LiFePO4/C powder for recycling of Fe/P

Sustainable Utilization of Fe(III) Isolated from Laterite Hydrochloric Acid Lixivium via Ultrasonic-Assisted Precipitation to Synthesize LiFePO4/C for Batteries

Preparation of Nanoscale Iron (III) Phosphate by Using Ferro-Phosphorus as Raw Material

Preparation of Fepo4 from Leaching Liquor of Fe-P Waste Slag and Its Application in Lithium Ions Batteries

Clean and efficient synthesis of LiFePO4 cathode material using titanium white waste and calcium dihydrogen phosphate

Preparation of battery-grade LiFePO4 by the precipitation method: a review of specific features

The recovery of high purity iron phosphate from the spent lithium extraction slag by a simple phosphoric acid pickling

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

A dual-cycle regeneration to recover high-value and high-purity FePO4 from real wastewater for Li-battery application

Extraction of lithium as lithium phosphate from bauxite mine tailings via mixed acid leaching and chemical precipitation

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Process for recycle of spent lithium iron phosphate battery via a selective leaching-precipitation method

Waste to treasure: A sustainable technic to prepare high-performance lithium iron phosphate from laterite nickel tailings

A method for recovering Li3PO4 from spent lithium iron phosphate cathode material through high-temperature activation