Abstract:In this work, we provide a holistic picture about the relationship between atomic structure, mechanical properties, and thermal stability of ZrCuAlx thin film metallic glasses (TFMGs) varying the Al content from 0 to 12 at.%, carrying out a broad characterization involving experiments and ab initio molecular dynamic simulations (AIMD). We show that the addition of Al resulted in a change of average interatomic distances by ∼10 pm with the formation of shorter bonds (Al-Zr and Al-Cu), influencing the mechanical response (shear/elastic moduli and hardness) which increases by ∼15% for 12 at.% Al. Moreover, tensile tests on polymer substrate revealed a maximum value for the crack initiation strain of 2.1% for ZrCuAl9, while the strain-to-failure rapidly decreases at higher Al contents. The observed reduction in damage tolerance is correlated to a transition in atomic configuration. Specifically, a maximum in density of full and defective icosahedral cluster population is observed at 9 at.% Al, inducing a more shear-resistant behavior to the material. Thermal stability is investigated by high-energy and conventional x-ray diffraction and electrical resistivity measurements as a function of the temperature. Glass transition (Tg ) and crystallization (Tx ) temperature increase by Al addition reaching 450 and 500 °C, respectively for ZrCuAl12. The increase in thermal stability is related to the reduction in atomic mobility due to the formation of shorter chemical bonds, inhibiting atomic reconfiguration during crystallization. In conclusion, we provide guidelines to the design of compositional-tailored ZrCuAlx TFMGs with tuned mechanical properties and thermal stability with potential impact on industrial applications.

Thermal Stability and Mechanical Properties of Cu-Based Bulk Glassy Alloys in Cu50(Zr1-xHfx)45Al5 System

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

Thermal Stability and Mechanical Properties of Zr50Ti5Cu18Ni17Al10 Bulk Metallic Glass

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

Formation, Structure, and Crystallization Behavior of Cu-Based Bulk Glass-Forming Alloys

Thermal Stability, Glass-Forming Ability and Mechanical Properties of Mg-Y-Zn-Cu Glassy Alloys

Fabrication Of Bulk Glassy Hf50cu30ni10al10 Alloy By Copper Mold Casting

Glass-Forming Ability and Mechanical Properties of the Ternary Cu-Zr-Al and Quaternary Cu-Zr-Al-Ag Bulk Metallic Glasses

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass

The Relations Between ΔT and the Glass Forming Ability of Bulk Amorphous Zr–Cu–Ni–Al–Hf–Ti and Zr52.5Cu17.9Ni14.6Al10Ti5 Alloys

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Crystallization Kinetics in Cu35ag15zr45al15 Metallic Glass

Formation and Thermal Properties of Ti-Based Bulk Amorphous Alloy

BULK AMORPHOUS Zr-Cu-Ni-Al-Hf-Ti ALLOYS WITH SUPERCOOLED LIQUID REGION OVER 140℃

Isothermal Stability and Selected Mechanical Properties of Zr48Cu36Al8Ag8 Bulk Metallic Glass

Microstructure and crystallization in Cu50Zr45Al5 metallic glass

Relationship between the precipitation of face-centered cubic Zr2Ni phase and the stability of supercooled liquid state in Zr-Cu-Ni-Al metallic glasses : Special issue on bulk amorphous, nano-crystalline and nano-quasicrystalline alloys

Mechanical properties and thermal stability of ZrCuAlx thin film metallic glasses: Experiments and first-principle calculations