Abstract:Split Hopkinson pressure bar (SHPB) is a widely used experimental technique for testing materials at a high strain-rate. SHPB testing of fiber-reinforced polymer (FRP) composite samples have become common in recent decades. Specimen geometry is one of the essential parameters that can ease sample fabrication and help in-situ analysis when altered as per convenience. Further, developing a computationally accurate model would reduce the need for multiple experimental iterations, thus saving cost and time. As part of the current study, high strain-rate tests using a compressive SHPB setup were conducted on glass/epoxy (GE) laminated composite samples of both square prismatic and cylindrical shape along the through-thickness direction experimentally. Negligible differences were observed due to the change in specimen geometry. Further, we know that the woven fabric consists of yarns, which are a bundle of fibers. The strain-rate dependency of the epoxy's material property is well known, but very limited information is available about the strain-rate dependency of yarn's properties. The effect of strain-rate dependency of the yarn was analysed numerically on Abaqus software using a square prismatic shaped yarn-level finite element composite model. The homogenised properties of the yarn were taken to be reflective of a high fiber volume fraction composite. The bulk epoxy's and yarn's material property were defined using the Johnson-Cook (JC) constitutive model, and the failure mechanism was defined using the JC damage model. One of the primary reasons for using this model is its availability and ease of implementation in almost every finite element analysis (FEA) simulation software. Three cases were analysed numerically, first keeping both yarn and bulk matrix property strain-rate dependent, second keeping the strain-rate dependency only in the bulk matrix, and in third case both yarn and matrix were kept strain-rate independent. It was observed that completely strain-rate dependent model showed comparable peak stress and strain values with the experimental result than other models.

Microscopic modeling and effective properties evaluation of glass/epoxy plain woven composites

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Prediction of elastic properties of woven polymer composites using micromechanical models and measured microstructural parameters

Micromechanical Analysis of Glass Fiber/Epoxy Lamina

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

An Analytical Model for the Uniaxial Tensile Modulus of Plain-Woven Fabric Composites and Its Application and Experimental Validation

Prediction of Longitudinal Elastic Modulus of Unidirectional Short-Fiber-reinforced Composites

Experimental and Numerical Analysis of the Microstructure and Mechanical Properties of Unidirectional Glass Fiber Reinforced Epoxy Composites

Modeling the effective elastic and viscoelastic properties of randomly distributed short fiber reinforced composites

Investigation on A Direct Modeling Strategy for the Effective Elastic Moduli Prediction of Composite Material

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

A Micromechanical Model for Interpenetrating Multiphase Composites

Finite element modelling and experimentation of plain weave glass/epoxy composites under high strain-rate compression loading for estimation of Johnson-Cook model parameters

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Multiscale Numerical Modeling for Thermal Behavior of Plain-Woven Composites with Interfacial and Internal Defects

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Numerical study of the Impact of shear angle, yarn spacing and yarn fiber volume fraction on effective elastic properties of plan-woven composite

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Point-Based Meso-Scale Modeling For Woven Composites

Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study