Abstract:Morphology evolution and orientation characteristics of precipitate of ultra-high strength titanium alloy was investigated in the present work. The continuous cooling tests were performed to control the precipitation of α phase after preservation in single-phase zone. The α GB (grain boundary α) is preferentially precipitated, followed by α I (intragranular α) during the continuous cooling process. Orientation of α GB is related to orientation of β grains on both sides of grain boundary and habit plane. The θ is proposed to represent the angle between the axis of misorientation and normal of the habit plane, and it can be used as an important index to judge orientation characteristics of α GB . Orientation of the flat α GB is characterized by a single orientation or two similar orientations when the θ<30°. The irregular α GB contains a greater number of α variants, and there is no obvious dominant variant when the θ>30°. The α I precipitated at different positions can contain the theoretical 12 α variants. However, α I nucleated at α GB is easily affected by the orientation of α GB. In this case, the strong variant selection occurs, which leads to the formation of colony structure. By contrast, the variant selection of α I , which is precipitated spontaneously in β phase, is not obvious. Under this condition, the basket-weave structure is formed. In addition, the existence of α GB with single orientation provides a convenient condition for the formation of colony α I . The basket-weave structure has better comprehensive properties, however, the opposite is true for colony structure. Therefore, strong variant selection of α I needs to be inhibited in order to effectively prevent the formation of colony structure, which requires that the orientation characteristics of α GB must be controlled.

Precipitation Behaviors And Orientation Evolution Mechanisms Of Alpha Phases In Ti-55511 Titanium Alloy During Heat Treatment And Subsequent Hot Deformation

Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation

Effect of β recrystallization on the precipitation evolution of primary α phase and the phase transformation inheritance during thermomechanical processing in Ti-55511 alloy

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

Morphology evolution and orientation characteristics of precipitate of ultra-high strength titanium alloy

The evolution of primary alpha phase and its effect on microtexture in Ti6242S during post-deformation heat treatment

The precipitation mechanism of secondary α-phase and formation of a bimodal microstructure in Ti6242S alloy cooled from the α + β phase field

Characterization of Hot Deformation Microstructure of a Near Beta Titanium Alloy Ti-5553

Phase Precipitation Behavior During Isothermal Deformation in Β-Quenched Near Beta Titanium Alloy Ti-7333

Mechanisms of grain boundary α precipitation in the metastable β-Titanium Ti-5Al-5Mo-5V-3Cr

Deformation-Induced Ambient Temperature Alpha-To-Beta Phase Transition And Nanocrystallization In (Alpha Plus Beta) Titanium Alloy

Effects of Plastic Deformation and Aging Treatment on Phase Precipitation in Ti2AlNb Alloy

Orientation effect on / phase interface mediated deformation mechanism in titanium alloy

Formation mechanism of lamellae during ¡ transformation in polycrystalline dual-phase Ti alloys

Effect of precipitation phase on microstructure and superelasticity of cold-rolled beta titanium alloy during heat treatment

The role of the ω phase on the microstructure evolution of precipitation and mechanical property in Ti-3Al-5Mo-4Cr-2Zr-1Fe

Deformation and Phase Transformation of Disordered α Phase in the (α + γ) Two-Phase Region of a High-Nb TiAl Alloy

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

The α2 precipitation from equiaxed γ phase in as-cast Ti-44Al-4Nb-2Cr-0.1B alloy

Precipitation Behavior of -Phase and Its Influence on Mechanical Properties in Ti-6Cr-5Mo-5V-4Al Alloy

Precipitation Behavior Of Alpha Phase And Mechanical Properties In Severely Plastic Deformed Ti-15-3 Alloy