Morphology and Quantitative Analysis of O Phase During Heat Treatment of Hot-Deformed Ti 2 AlNb-based Alloy

Hong-yu Zhang,Chong Li,Zong-qing Ma,Li-ming Yu,Hui-jun Li,Yong-chang Liu

DOI: https://doi.org/10.1007/s12613-018-1671-y

2018-01-01

International Journal of Minerals Metallurgy and Materials

Abstract:A 1040°C-hot-deformed Ti 2 AlNb-based alloy solution-treated at 950°C and aged at different temperatures was quantitatively investigated. The microstructure, size of the phase, and microhardness of the deformed alloys were measured. The results indicated that the microstructure of the deformed Ti 2 AlNb-based alloy specimens comprise coarse O lath, fine O lath, equiaxed O/α 2 , and acicular O phase. More O phase was generated in the deformed alloy after heat treatment because the acicular O phase was more likely to nucleate and grow along the deformation-induced crystal defects such as dislocations and subgrain boundaries. After deformation and subsequent heat treatment, the acicular O phase of the resultant alloy became finer compared to that of the undeformed alloy, and the acicular O phase became coarser and longer with the elevated aging temperature, while the width of the O lath exhibited unobvious variations. The hot deformation facilitated the dissolution of the O lath but accelerated the precipitation of the acicular O phase. When the 950°C-solution-treated deformed Ti 2 AlNb-based alloy was then aged at 750°C for different periods, the phase content was nearly invariable, O and B2 phases eventually reached equilibrium, and the microstructure became stable and homogeneous.