Abstract:High molecular weight polyether polyols are widely used. However, there is not only a large risk of reaction heat, but also a long reaction time in its traditional production process by using the semi-continuous reactor. The microchannel reactor（MCR） has the characteristics of high heat transfer efficiency and process safety,but the viscous material and high reaction heat release make it difficult to produce the high molecular weight polyether polyols. In this work, using double metal complex（DMC） as catalyst and n-hexane as solvent, the ringopening polymerization of propylene oxide（PO） was carried out in MCR. Polypropylene glycol（PPG） with molecular weight ranging from 2000 to 8000 was prepared. Effects of reaction conditions, such as flow rate, channel length,reaction temperature and feed policy, were investigated. It has been found that when the residence time is long enough, the molecular weight of the produced PPG is basically equal to the theoretical molecular weight. When the flow rate of initiator is fixed, an increase in flow rate of monomer will result in the molecular weight distribution（MWD） first widened and then narrowed. If the tube length is longer, the molecular weight is larger and the MWD is wider. If the temperature increases, the induction period of the polymerization can be shortened. Using the segmented feed, it is easier to prepare high molecular weight PPG with higher conversion than using the single feed, but the MWD is wider. These rules can be explained from the mechanism of PO ring-opening polymerization catalyzed by DMC and micro-mixing strength of materials in MCR. The lower the micro-mixing strength, and the smaller the rate ratio of chain transfer to chain propagation in polymerization, the wider the molecular weight distribution is.

Ring-Opening Polymerization of Propylene Oxide by Double Metal Complex in Micro-Reactor

Preparation of high molecular weight polypropylene glycol in microchannel reactor

Molecular Weight Distribution in Ring‐Opening Polymerization of Propylene Oxide Catalyzed by Double Metal Complex: A Model Simulation

Ring-Opening Polymerization of Diisopropyl Cyclopropane-1,1-dicarboxylate under Living Anionic Conditions: A Kinetic and Mechanistic Study

Ring-opening Polymerization of Propylene Oxide Catalyzed by Fe-Zn Double Metal Cyanide Catalyst and Its Synthesis

Ring‐Opening Polymerization of Propylene Oxide Catalyzed by a Calcium‐Chloride‐Modified Zinc‐Cobalt Double Metal‐Cyanide Complex

Ring-opening Copolymerization of CHO and MA Catalyzed by Mononuclear [zn(l2)(h2o)] or Trinuclear [zn3(l2)2(oac)2] Complex Based on the Asymmetrical Bis-Schiff-base Ligand Precursor

Fe/Zn Double Metal Cyanide (dmc) Catalyzed Ring-Opening Polymerization of Propylene Oxide. Part 3. Synthesis of Dmc Catalysts

Highly Active Heterogeneous Double Metal Cyanide Catalysts for Ring-Opening Polymerization of Cyclic Monomers

Role of Zinc Chloride and Complexing Agents in Highly Active Double Metal Cyanide Catalysts for Ring-Opening Polymerization of Propylene Oxide

Ring Opening Polymerization of Propylene Oxide by Chitosan-Supported Rare Earth Catalytic System and Its Kinetics

Reaction Rate Control in Ring Opening Metathesis Polymerization of Dicyclopentadiene with Grubbs Catalyst

Calcium Chloride Doped Zinc-Cobalt Metal-Cyanide Complex: Unexpected Highly Activity Towards Ring-Opening Polymerization of Propylene Oxide

MCM-41-supported double metal cyanide nanocomposite catalyst for ring-opening polymerisation of propylene oxide

Highly Efficient Two‐stage Ring‐opening of Epichlorohydrin with Carboxylic Acid in a Microreaction System

Controlled Free Radical Ring-Opening Polymerization and Chain Extension of the "living" Polymer

Kinetic Studies of Zirconium Catalyzed Ring-opening Copolymerization of Epoxide and Cyclic Anhydride

Mechanism of propylene oxide polymerization on Zn/Co double metal cyanide complex catalyst

Copolymerization of Carbon Dioxide and Propylene Oxide by DMC: Effect of Central Metal on Catalytic Performance

Random Copolymer of Propylene Oxide and Ethylene Oxide Prepared by Double Metal Cyanide Complex Catalyst

Ring Opening Copolymerization of Epoxides with CO2 and Organic Anhydrides Promoted by Dinuclear [OSSO]‐type Metal Complexes