Abstract:Using cobaloxime boron fluoride (COBF) and AIBN as catalyst and initiator respectively, the catalytic chain transfer bulk polymerization of 2-hydroxyporpyl methacrylate ( HPMA) was carried out at 60 degrees C and the low molecular weight polymer with a terminal double bond was prepared. The evolution of the apparent chain transfer constant (C-S(spp)) of COBF during the polymerization was determined by the Mayo equation and the CLD (chain length distribution) equation respectively. At the beginning of the reaction the chain transfer constant showed values of up to about 2000, but with the increasing of the monomer conversion, the chain transfer constant decreases and keeps at a value of about 600 for sometime and then decreased again. The most likely cause for the catalyst deactivation is the stable cobalt-carbon bond formed at the first period of the reaction and then reached equilibrium point. When the polymerization proceeds up to middle and high conversion, the chain transfer polymerization is further manipulated by diffusions of polymeric propagating chain and catalyst molecules, and the apparent chain transfer constant fell to value of below 300. It has been found also, that the data determined by the CLD equation are usually lower than those by the Mayo equation, especially at high conversion stage. It is because that both original equations are available for the instantaneous produced polymer or the case of very lower conversion stage. However, the GPC measurements give molecular weight distributions of the cumulated products rather than the instantaneous produced polymer. The number-average polymerization degrees for the instantaneous produced polymers were obtained from the GPC data, and used in the Mayo equation method together with the modification of the monomer concentration. It was believed that the apparent chain transfer constants from the modified Mayo equation method are more available for the middle and high conversion cases.

Continuous Thermal Bulk Copolymerization of Styrene and Maleic Anhydride

Semicontinuous thermal bulk copolymerization of styrene and maleic anhydride: Experiments and reactor model

Studies on the continuous precipitation copolymerization of acrylonitrile in aqueous medium with high monomer feed concentration: I conversion, MW and MWD

Modeling for the Diffusion Limitation of Free Radical Polymerization

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene Glycol): Modeling and Simulation of Semi‐Batch and Continuous Processes

CFD Modeling of Styrene Polymerization in a CSTR

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene glycol): Kinetics and Modeling

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Full‐range Kinetic Study on Bulk Syndiotactic Polymerization of Styrene with Homogeneous Metallocene Catalysis

Study on Semi-Continuous Bulk Polymerization for Impact-Resistant SMA in a Pilot Plant

Model Development for Semicontinuous Production of Ethylene and Norbornene Copolymers Having Uniform Composition

Phase inversion during bulk copolymerization of N-phenylmaleimide/styrene in presence of polybutadiene (II): Effects of operation conditions and recipes on occurrence of phase inversion and structure of rubber phase

THE EVOLUTION OF THE CHAIN TRANSFER CONSTANT DURING THE CATALYTIC CHAIN TRANSFER POLYMERIZATION OF 2-HYDROXYPROPYL METHACRYLATE

Studies on Anionic Continuous Solution Copolymerization of Butadiene/Styrene with N-Buli Initiator

Ionic Polymerizations in Continuous Flow

Tuning polymer blends to cocontinuous morphology by asymmetric diblock copolymers as the surfactants

Ring-Opening Polymerization of Propylene Oxide by Double Metal Complex in Micro-Reactor

Control of Gradient Copolymer Composition in Atrp Using Semibatch Feeding Policy

Simulation of Bulk Styrene Polymerization Process in Continuous Stirred Reactors

Simulation of an industrial continuous bulk styrene polymerization process