Abstract:A continuous process for the production of multiblock polymers via living anionic polymerization in a loop reactor is proposed by kinetic modeling. The process utilizes specific configurations of the loop reactors and feed inlets, thus producing multiblock polymers constituted by a blend of chains with varying number of blocks. The dependence of the product molecular parameters, such as length, composition of each block, and the block number distribution, on the residence time and the recirculation fraction is analyzed by numerical integration of differential mass balances. This dependence is subsequently translated into controllability of molecular parameters by changing the operation conditions such as the recirculation and inlet flow rates. In general, higher recirculation flow rate yields products with shorter block length but larger fraction of polymers possessing higher number of blocks and more significant compositional mixing in each block. An increase in the feed flow rates also increases the compositional mixing but gives longer block length with lower fraction of polymers possessing a higher number of blocks. While being discussed in terms of living anionic copolymerization of styrene and butadiene, the present strategy can be extended to any other living copolymerization of suitable monomer pairs, thus highlighting the use of reaction engineering to control the polymer structures.

Ionic Polymerizations in Continuous Flow

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Progress in reactor engineering of controlled radical polymerization: a comprehensive review

Continuous Thermal Bulk Copolymerization of Styrene and Maleic Anhydride

Advances in Polymerization Using Ionic Liquid as Reaction Media

Anionic polymerization driven by flow microchemistry

A continuous flow-through strategy to produce highly isotactic poly(isobutyl vinyl ether) via cationic polymerization

Ring-Opening Polymerization of Propylene Oxide by Double Metal Complex in Micro-Reactor

Polymer product engineering: an emerging discipline of chemical engineering for high performance polymer materials

Microflow System for Controlled Synthesis of Ethylene-Vinyl Acetate Copolymers: Continuous Copolymerization and Kinetic Study

Electro-Controlled Living Cationic Polymerization.

Continuous Production of Multiblock Copolymers in a Loop Reactor: when Living Polymerization Meets Flow Chemistry

Continuous Microfluidic Reactors For Polymer Particles

Intensification of Polymerization Processes by Reactive Extrusion

Fast Living Cationic Polymerization of Isobutyl Vinyl Ether Tailored by Single Nucleophile in Microflow System

Application of microreactors in polymerization

Recent Advances in the Application of Metal–Organic Frameworks for Polymerization and Oligomerization Reactions

Computer-Aided Living Polymerization Conducted under Continuous-Flow Conditions?

Advances in polymer synthesis in microreactors

The influence of mixing on chain extension by photo-controlled/living radical polymerization under continuous-flow conditions

Achieving Low-Cost and Accelerated Living Cationic Polymerization of Isobutyl Vinyl Ether in Microflow System