Abstract:Complete solid-solution Ti(C,N)-based cermet, with no typical core-rim structure, was synthesized through mechanical activation and subsequent in situ carbothermal reduction method. XRD, SEM, TEM, and C/N analysis were used to investigate the microstructure, phase transformation, and the interfacial characteristics of the present cermets. During solid-state sintering, the (Ti,Mo)C/(Ti,Mo)(C,N) phases formed through the transformation of Mo-based solid solution which generated by mechanical activation. Then, the formed (Ti,Mo)C/(Ti,Mo)(C,N) continuously dissolved into the nickel-based binder above 1100 °C. It was found that in the subsequent stage of liquid sintering, the mechanical activation and also the presence of extremely fine TiC/Ti(C,N) particles accelerated the Mo diffusion into the hard phase, resulting in a large quantity of (Ti,Mo)(C,N) solid solutions formed in the nickel-based binder. Finally, complete (Ti,Mo)(C,N) solid-solution phase was obtained via dissolution and re-precipitation. The higher toughness and transverse rupture strength (TRS) of the synthesized new cermet, as compared with traditional cermets, were mainly caused by the increased crack deflection and transgranular fracture of the novel cermets. Moreover, the interface among the Ni-based binder phase and complete solid solution hard phase exhibited a semi-coherency state with high-density dislocations, which also significantly improved the TRS and toughness of the synthesized cermets.

Liquid sintering and application of ternary-boride based Cermet

Microstructure and mechanical properties of newly synthesized Mo(Co,Fe)B cermets

A Review of Research Progress on Ti(C,N)-Based Cermet Binder by Intermetallic Compounds and High-Entropy Alloys

Influence of the Metal Particle Size and Sintering Process on the Electrical Resistivity of M-Zro2/30%mo Cermet

Synthesis of TiB 2 /Ti(C,N) cermet by RSPS: formation mechanism, shrinkage behavior, and mechanical properties

Preparation of the Percolative Nickel-Zinc Ferrite/Barium Titanate Composite Ceramics with Liquid-Solid Hybrid Method

Development of Coating Material by In-Situ Reaction Synthesis

Formation of solid solution structures in (Ti,W,Ta,Mo)(C,N) cermet via spark plasma sintering

Synthesis, microstructure evolution, and phase transformation of novel MoCoB-Co cermets

Evolution of microstructure and interfacial characteristics of complete solid-solution Ti(C,N)-based cermets fabricated by mechanical activation and subsequent in situ carbothermal reduction

Synthesis of the Ternary Metal Carbide Solid‐solution Ceramics by Polymer‐derived‐ceramic Route

Effects of WC/TiC addition on the thermodynamic behavior of TiB 2 -based cermet during sintering process

A first-principles study on the potential of MAB2 (M=Nb, ta; A=Co, Ni) ternary borides as friction-resistance cermet

Metastable Si-B-C-N ceramics and their matrix composites developed by inorganic route based on mechanical alloying: Fabrication, microstructures, properties and their relevant basic scientific issues

Study on borides and its composites

Micro-Nanostructured Cermet Coatings

Bulk Mo2FeB2 Based Cermets Fabricated by Mechanical Ball Milling and Reaction Boronizing Sintering

Development of TiCN-based cermets: Mechanical properties and wear mechanism

Study on Boron Carbide Ceramics Sintering Method

Effect of pre-solid solution treatment of secondary carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets

New Progress in the Preparation of Sintering and Application of Boron Carbide Ceramics