Abstract:Boron carbide ceramics possess high hardness, but they generally are subjected to low toughness due to strong covalent bonds. However, the fabrication of dense and pure polycrystalline boron carbide bulks with excellent mechanical properties by conventional methods remains a significant challenge. Here, the fine-grained and pure polycrystalline boron carbide bulks have been successfully fabricated utilizing submicron-sized boron carbide powder as starting materials under the condition of high pressure (5.5 GPa) and low temperature range (1000–1400 °C). The well-sintered boron carbide bulk recovered at 1000 °C exhibits a mean grain size of 205.2 ± 191.2 nm and relative density of up to ∼97%, and the measured Vickers hardness and fracture toughness achieve 35.0 ± 2.8 GPa and 4.6 ± 0.5 MPa m0.5, respectively. The outstanding trade-off between hardness and toughness demonstrated that the synergistic effect between fine grain size and dislocation, and the interplay between amorphous grain-boundary phases and pores via grain-boundary sliding have critical role in contributing to improve hardness and toughness, respectively. This study has essential implications in sintering fine-grained and pure polycrystalline engineering ceramics and superhard materials, which provide a tuning approach to enhance the mechanical properties.

Study on Boron Carbide Ceramics Sintering Method

New Progress in the Preparation of Sintering and Application of Boron Carbide Ceramics

Development of boron carbides

Progress in pressureless sintering of boron carbide ceramics – a review

Sintering pure polycrystalline boron carbide bulks with enhanced hardness and toughness under high pressure

Effects of boron source on properties of pressureless solid-state sintered silicon carbide ceramics

Influence of Silicon Addition on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

Microstructure and Mechanical Properties of B4C - C Ceramic

Study on the Performance for Silicon Carbide Ceramics by Hot-pressing Sintering

Methods for synthesizing boron carbide powder and controlling its sintering piece density

Influence of CNTs on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Optimal preparation of high-entropy boride-silicon carbide ceramics

Thermal Shock Resistance of the Porous Boron Nitride/silicon Oxynitride Ceramic Composites

Effect of the Addition of Carbon on the Sintering Properties of Boron Carbide Ceramics Prepared by Pressureless Sintering

Study of Machinable Silicon Carbide–boron Nitride Ceramic Composites

Influence of carbon on sintering behavior and microstructure of boron-rich carbide

Contribution of boundary non-stoichiometry to the lower-temperature plasticity in high-pressure sintered boron carbide

Densification and mechanical properties of boron carbide with micro-hole array by micro-powder injection molding

Mechanical Property and Ballistic Performance of Silicon Carbide