Evolution of microstructure and interfacial characteristics of complete solid-solution Ti(C,N)-based cermets fabricated by mechanical activation and subsequent in situ carbothermal reduction
Xiangyu Xu,Yong Zheng,Jiajie Zhang,Zheng Ke,Hao Wu,Zhengkai Yang
DOI: https://doi.org/10.1016/j.ceramint.2021.02.251
IF: 5.532
2021-06-01
Ceramics International
Abstract:Complete solid-solution Ti(C,N)-based cermet, with no typical core-rim structure, was synthesized through mechanical activation and subsequent in situ carbothermal reduction method. XRD, SEM, TEM, and C/N analysis were used to investigate the microstructure, phase transformation, and the interfacial characteristics of the present cermets. During solid-state sintering, the (Ti,Mo)C/(Ti,Mo)(C,N) phases formed through the transformation of Mo-based solid solution which generated by mechanical activation. Then, the formed (Ti,Mo)C/(Ti,Mo)(C,N) continuously dissolved into the nickel-based binder above 1100 °C. It was found that in the subsequent stage of liquid sintering, the mechanical activation and also the presence of extremely fine TiC/Ti(C,N) particles accelerated the Mo diffusion into the hard phase, resulting in a large quantity of (Ti,Mo)(C,N) solid solutions formed in the nickel-based binder. Finally, complete (Ti,Mo)(C,N) solid-solution phase was obtained via dissolution and re-precipitation. The higher toughness and transverse rupture strength (TRS) of the synthesized new cermet, as compared with traditional cermets, were mainly caused by the increased crack deflection and transgranular fracture of the novel cermets. Moreover, the interface among the Ni-based binder phase and complete solid solution hard phase exhibited a semi-coherency state with high-density dislocations, which also significantly improved the TRS and toughness of the synthesized cermets.
materials science, ceramics