Abstract:Barium slag (BS) is a kind of industrial solid waste generated in barium salt production. Barium in BS can be considered as a secondary source as the content of BaO is as high as 34.80%. The main existent forms of barium in BS are BaSO4, BaCO3 and BaSiO3. It is challenging to dissolve BaSO4 using conventional acids and alkalis due to the low solubility. In this study, diethylenetriaminepentaacetic acid (DTPA) was introduced to investigate the dissolution behavior of barium in BS, and the DTPA complex solution was acidified to release barium for submicron BaSO4 products preparation. Leaching tests were carried out at DTPA concentrations of 0.025–0.30 mol/L, liquid solid ratio of 10–100 mL/g, pH of 8.0–13.0, and reaction temperature of 20–80 °C. The leaching efficiency of barium was 78.64% under the conditions of using 0.10 mol/L DTPA solution (pH of 12.0) at 80 °C for 300 min with the liquid solid ratio of 50 mL/g. BaSO4 products were obtained by the addition of H2SO4 to acidify the leachate at pH ranges of 9.0–7.5. Characterization results from X-ray diffraction, scanning electron microscopy, transmission electron microscopy and dynamic light scattering indicated that the BaSO4 products were nearly sphere particles with the average diameter of 300–500 nm. This work demonstrates that DTPA can dissolve barium in BS and acidifying Ba-DTPA leachate can dissociate barium ions. Furthermore, barium source in BS can be recovered in the form of submicron BaSO4 products through DTPA complexation and decomplexation process.

Preparation of barium sulfate submicro-particles with high purity by solventing-out process

Preparation of Core-Shell Polycarbonate/BaSO_4 Submicron Composite Particles

Preparing Ultrafine Barium Sulfate Particles Using Membrane-Dispersion-precipitation Technology

Solid Separation from a Mixed Suspension Through Electric-Field-Enhanced Crystallization.

Preparation of barium sulfate particles using filtration dispersion precipitation method in O/W system

Preparation of ultrafine barium sulfate particle using a water/oil microemulsion

Interfacial Phenomena in the Synthesis Process of Barium Sulfate Particles Precipitated in a Lobed Inner Cylinder Taylor-Couette Flow Reactor: Effects of Fluid Dynamics

Study on Preparation of Polycarbonate Micro-Particles by Liquid Anti-Solvent Crystallization

Preparation of BaSO4 nanoparticles in non-ionic w/o microemulsions

Process intensification of BaSO4 nanoparticle preparation with agitation of microbubbles

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Controllable Preparation and Formation Mechanism of BSA Microparticles Using Supercritical Assisted Atomization with an Enhanced Mixer

Preparation of ultrafine barium sulfate in impinging streams microreactor

Synthesis of Highly Dispersed Barium Titanate Nanoparticles by a Novel Solvothermal Method

Membrane dispersion precipitation method to prepare nanopartials

Preparation of A Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin Films

Study on Preparation of Polystyrene Micro-particles by Solventing-out Process

Dissolution behavior of DTPA-promoted barium slag and synthesis of submicron BaSO4 particles

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Reuse of Microemulsion for Preparing Barium Sulfate Nanoparticles Through Breaking the Microemulsion by Distillation

Synthesis of BaSO4 Nanofibers Controlled by the Yield of Hydrated Electrons in AOT-Based Microemulsions