Abstract:(NH4)Fe-2(PO4)(2)(OH)center dot 2H(2)O samples with different morphology are successfully synthesized via two-step synthesis route - ultrasonic-intensified impinging stream pre-treatment followed by hydrothermal treatment (UIHT) method. The effects of the adoption of ultrasonic-intensified impinging stream pre-treatment, reagent concentration (C), pH value of solution and hydrothermal reaction time (7) on the physical and chemical properties of the synthesised (NH4)Fe-2(PO4)(2)(OH)center dot 2H(2)O composites and FePO4 particles were systematically investigated. Nano-seeds were firstly synthesized using the ultrasonic-intensified T-mixer and these nano-seeds were then transferred into a hydrothermal reactor, heated at 170 degrees C for 4 h. The obtained samples were characterized by utilising XRD, BET, TG-DTA, SEM, TEM, Mastersizer 3000 and FTIR, respectively. The experimental results have indicated that the particle size and morphology of the obtained samples are remarkably affected by the use of ultrasonic-intensified impinging stream pre-treatment, hydrothermal reaction time, reagent concentration, and pH value of solution. When such (NH4)Fe-2(PO4)(2)(OH)center dot 2H(2)O precursor samples were transformed to FePO4 products after sintering at 650 degrees C for 10 h, the SEM images have clearly shown that both the precursor and the final product still retain their monodispersed spherical microstructures with similar particle size of about 3 pm when the samples are synthesised at the optimised condition.

Preparation of ultrafine barium sulfate in impinging streams microreactor

Preparation of barium sulfate submicro-particles with high purity by solventing-out process

Interfacial Phenomena in the Synthesis Process of Barium Sulfate Particles Precipitated in a Lobed Inner Cylinder Taylor-Couette Flow Reactor: Effects of Fluid Dynamics

Precipitation of barium sulfate nanoparticles via impinging streams

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

Preparation of ultrafine barium sulfate particle using a water/oil microemulsion

Preparing Ultrafine Barium Sulfate Particles Using Membrane-Dispersion-precipitation Technology

Controllable Synthesis of Hierarchical Micro/nano Structured FePO4 Particles under Synergistic Effects of Ultrasound Irradiation and Impinging Stream

Controllable Synthesis of (nh4)fe2(po4)2(oh)·2h2o Using Two-Step Route: Ultrasonic-intensified Impinging Stream Pre-Treatment Followed by Hydrothermal Treatment.

Preparation of barium sulfate particles using filtration dispersion precipitation method in O/W system

Membrane dispersion precipitation method to prepare nanopartials

Experimental Study on Micromixing in A Single-Feed Semibatch Precipitation Process in A Gas-Liquid-Liquid Stirred Reactor

Preparation of ultra-fine TiO2 particles using micro-mixing precipitation technology

Process intensification of BaSO4 nanoparticle preparation with agitation of microbubbles

In situ preparation and surface modification of barium sulfate nanoparticles

Preparation of Highly Dispersed SiO 2 Nanoparticles Using Continuous Gas-Based Impinging Streams

Preparation of Spherical Ultrafine Silver Particles Using Y-Type Microjet Reactor

Enhancement of Mixing and Mass Transfer Performance with a Microstructure Minireactor for Controllable Preparation of CaCO3 Nanoparticles

Controllable Preparation of Sio2 Nanoparticles Using A Microfiltration Membrane Dispersion Microreactor

Scalable Preparation of Monodisperse Micron-Sized Carbon Microspheres and Their Application in Anion-Exchange Chromatography

Modelling and Experimental Investigation of Micromixing of Single-Feed Semi-Batch Precipitation in a Liquid–liquid Stirred Reactor