Abstract:In high-temperature and high-salt environments, emulsions stabilized by surfactants are susceptible to instability phenomena, such as droplet coalescence, thereby limiting their utility in tertiary oil recovery. Addition of nanoparticles to the emulsion systems is able to improve the stability of emulsions by several mechanisms. In this paper, two kinds of SiO 2 nanoparticle stabilized emulsions, i.e., the electrostatic repulsion stabilized emulsions (ERS) and the Pickering emulsions, are investigated to clear their potential for enhancing oil recovery. The ERS emulsions are prepared by adding SiO 2 nanoparticle to a SDS stabilized emulsion. It is found that the critical surfactant concentration for forming emulsions is reduced from 0.06 to 0.006%, and the ERS emulsions are stable at salinity lower than 1% NaCl with no oil phase releasing. The cryo-SEM experiments show that the nanoparticles mainly disperse in the aqueous phase and prevent the droplets from coalescence by electrostatic repulsion. On the other hand, Pickering emulsions are prepared using nonionic surfactant modified SiO 2 nanoparticles. By adjusting a surfactant-to-nanoparticles ratio (such as 0.1%:1.0%), the hydrophilic-lipophilic equilibrium is obtained. Laser confocal and cryo-scanning electron microscopy results indicated that SiO 2 nanoparticles in Pickering emulsions are dispersed at the oil–water interface, forming a network structure between the emulsion droplets. Further experiments indicates that the ERS emulsions are effective at salinity lower than 1% NaCl, and the Pickering emulsions adapt to salinity lower than 4% NaCl. In the visual 2-D oil displacement experiments, the ERS emulsion and the Pickering emulsion contribute to 8% and 15% oil recovery, respectively, since the droplets of the Pickering emulsions may aggregate and plug large pores.

Reuse of Microemulsion for Preparing Barium Sulfate Nanoparticles Through Breaking the Microemulsion by Distillation

Preparation of barium sulfate submicro-particles with high purity by solventing-out process

Preparation of barium sulfate particles using filtration dispersion precipitation method in O/W system

Preparation of BaSO4 nanoparticles in non-ionic w/o microemulsions

Preparation of ultrafine barium sulfate particle using a water/oil microemulsion

Membrane dispersion precipitation method to prepare nanopartials

Miniemulsification of butyl acrylate containing nanometer silica particles

Stability and Synthesis of Barium Fluoride Nanoparticles from CTAB/Butanol/Heptane/Water Microemulsion System

Process intensification of BaSO4 nanoparticle preparation with agitation of microbubbles

COMPOSITION AND STABILITY OF W/O MICROMULSIONS FOR PREPARATION OF BaSO4 NANOPARTICLES

Preparing Ultrafine Barium Sulfate Particles Using Membrane-Dispersion-precipitation Technology

Synthesis of BaSO4 Nanofibers Controlled by the Yield of Hydrated Electrons in AOT-Based Microemulsions

Immobilizing Water into Crystal Lattice of Calcium Sulfate for Its Separation from Water-in-Oil Emulsion.

Destructing Surfactant Network in Nanoemulsions by Positively Charged Magnetic Nanorods to Enhance Oil-Water Separation

In situ preparation and surface modification of barium sulfate nanoparticles

Analysis of the Thermodynamic Stability for the W/O Microemulsion Based on the Phase Diagram Method

Breaking oil-in-water emulsions stabilized by yeast

Study on oil-in-water emulsions stabilized by SiO2 nanoparticles for enhancing oil recovery in harsh reservoirs

Crude oil/water nanoemulsions stabilized by rhamnolipid biosurfactant: Effects of acidity/basicity and salinity on emulsion characteristics, stability, and demulsification

Coalescence and separation of surfactant-stabilized water-in-oil emulsion via membrane coalescer functionalized by demulsifier

Formation of Nanoparticles in Water-in-oil Microemulsions Controlled by the Yield of Hydrated Electron: the Controlled Reduction of Cu2+.