Abstract:BaTiO3 has advantages of high permittivity, low dielectric loss, low cost and environment friendly. However, due to the nonlinear dielectric behavior occurred around the phase transition temperature of BaTiO3 ceramic, its availability in the field of temperature-stable capacitor is limited. To modify the dielectric-temperature properties of BaTiO3, a series of BaTi1-xCexO3 (x=0-0.20) ceramics was synthesized by solid-state reaction method. Ce dopant was introduced into the B-site (Ti-site) of BaTiO3. The effects of Ce dopant on the phase evolution, defect state, microstructure and dielectric properties were investigated. The modifying mechanism was also discussed with the help of first-principles calculation method. In all ceramic samples, it is revealed that Ce element completely enters the B-site of BaTiO3 in the form of Ce4+ ion. With the increase of Ce doping concentration, the room temperature structure of BaTi1-xCexO3 ceramics transforms from tetragonal/pseudo-cubic structure into orthorhombic/tetragonal structure, then into pseudo-cubic structure. Owing to the radius difference between Ce4+ and Ti4+ ions, Ce doping will lead to the rising of lattice parameters, accompanied by the appearance of local distortion and the decrease of long-range ferroelectric order, the variation of band structure, density of states and charge density configuration, as well as the generation of Ba and Ti vacancies. Compared with pure BaTiO3 ceramic, the average grain size of Ce-doped ceramics decreases first and then increases with the increase of Ce content, while the relative density of ceramics increases gradually. The peak dielectric constant of BaTi1-xCexO3 ceramic increases first and then decreases as the Ce concentration increasing. The corresponding temperature is slowly reduced from 122 celcius to 112 celcius in the x value range of 0-0.08, then rapidly declines to -3 celcius in the x value range of 0.08-0.20. BaTi1-xCexO3 ceramics with x >= 0.06 have the dielectric behavior of diffused phase transition (DPT). And the x=0.20 ceramic exhibits the typical characteristic of relaxor ferroelectric, with the room temperature dielectric constant of 3258.38, and the |Delta epsilon(r)/epsilon(r25 celcius)|<= 22% temperature range of -60-87 celcius, which matches the requirement of EIA X5S standard. Therefore, it can be concluded that B-site Ce doping will effectively enhance the permittivity stability of BaTiO3 in a variable temperature environment. This will provide some new ideas to develop dielectric materials with stable dielectric properties in wide temperature range.

A Temperature Stable (ba1–ce )(ti1–/2mg/2)o3 Lead-Free Ceramic for X4D Capacitors

Medium Temperature Sintered BaTiO3-based Ceramics for X8R Capacitors

Experimental study and first-principles calculation of structural characteristics and dielectric properties of Ba Ti<sub>1-x </sub>Ce<sub>x </sub>O<sub>3</sub> ceramics

Structure and enhanced dielectric temperature stability of BaTiO3-based ceramics by Ca ion B site-doping

Broadening the Dielectric Stability Temperature Range of BNBST Relaxor Ferroelectric Ceramics by Rare Earth Ce Doping for Energy Storage

Simultaneous Enhancement of Dielectric Properties and Temperature Stability in BaTiO3‐based Ceramics Enabling X8R Multilayer Ceramic Capacitor

Study On Structure And Properties Of X7r Ceramics Based On Batio3 With High Dielectric Constants

Unveiling High Resistivity Mechanism in (0.8-X)batio3-0.2bisco3-x(bi0.5li0.5)tio3 Ceramics with Good Dielectric Temperature-Stability

Ultrabroad Temperature Stability of Stuffed Tridymite-Type BaAl2O4 Co-Doped by [zn0.5ti0.5]3+ with Weak Ferroelectricity

Crystal Structure and Temperature Dependence of Permittivity in Barium Aluminate Based Solid Solutions

High-Temperature Capacitor Based on Ca-Doped Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub> Ceramics

La2O3 Modified 0.4(ba0.8ca0.2)tio3–0.6bi(mg0.5ti0.5)o3 Ceramics for High-Temperature Capacitor Applications

High relative permittivity, low dielectric loss and good thermal stability of BaTiO 3 -bi(Mg 0.5 Zr 0.5 )O 3 solid solution

Lead-free (1-x)Bi0.5Na0.5TiO3-xCaSnO3 ceramics with high thermal stability

Dielectric Properties and Microstructures of Ta-doped BaTiO 3 –(bi 0.5 Na 0.5 )tio 3 Ceramics for X9R Applications

Temperature stable (1-x)(0.9Na0.5Bi0.5TiO3-0.1BiAlO3)-xNaTaO3 ceramics and capacitors with ultra-wide operational range

High Permittivity and Excellent High‐temperature Energy Storage Properties of X9R BaTiO3–(Bi0.5Na0.5)TiO3 Ceramics

High Temperature Dielectrics and Defect Characteristic of (nb, Mn, Zr) Modified 0.4(ba 0.8 Ca 0.2 )tio 3 – 0.6bi(mg 0.5 Ti 0.5 )O 3 Ceramics

Dielectric properties of BaTiO3 and Ba0.95Ca0.05TiO3 sintered in a reducing atmosphere

Ultrahigh energy storage performance of a 0.75Bi0.47Na0.47Ba0.06TiO3-0.25CaTi0.8Sn0.2O3 ceramic under moderate electric fields

High Temperature Dielectric Stable (1-X) [(na0.5bi0.5)0.92ba0.08]0.955la0.03tio3 -Xnanbo3 System with Ultra-Low Dielectric Loss Range Through Optimizing the Defect Chemistry