Abstract:The effects of ZnO and CeO2 on the microstructure and dielectric temperature characteristics of the Mn-modified (Bi0.5Na0.5)0.88Ca0.12TiO3 ceramics were investigated to develop temperature-stable dielectric ceramics. By adding 1–2 wt% ZnO, the overall dielectric constant increased. With further increasing the amount of ZnO, the dielectric constant at temperatures lower than 25 °C decreased, whereas the dielectric constant at temperatures higher than 75 °C increased. The temperature characteristic of capacitance became flatter when more than 4 wt% ZnO was doped. By adding CeO2, the dielectric constant decreased and a flat temperature characteristic of permittivity was obtained. X-ray diffraction analysis revealed that the perovskite BNT phase formed for all the compositions and the secondary phases Zn2TiO4 and Bi2Ti2O7 occurred, respectively when ZnO and CeO2 was added. Scanning electron microscope indicated that an inhomogeneous microstructure comprising fine and rectangle grains was observed in the ZnO-free sample. ZnO less than 2 wt% could inhibit the grain growth and decrease long grains. However, the grain growth was promoted as more than 8 wt% ZnO was added. The dielectric loss with different contents of ZnO and CeO2 were characterized as the function of temperatures for potential use at high temperature. The dielectric loss at 25 °C was independent of the amounts of ZnO and CeO2. However, the dielectric loss at 250 °C decreased by adding 1 wt% ZnO and then increased with increasing ZnO. This system is considered to be a potential material for high-temperature capacitors.

High Temperature Dielectrics and Defect Characteristic of (nb, Mn, Zr) Modified 0.4(ba 0.8 Ca 0.2 )tio 3 – 0.6bi(mg 0.5 Ti 0.5 )O 3 Ceramics

High-temperature stable dielectrics in Mn-modified (1-x) Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-xCaTiO<sub>3</sub> ceramics

High-temperature stable dielectrics in Mn-modified (1-x) Bi 0.5 Na 0.5 TiO 3 -xCaTiO 3 ceramics

High relative permittivity, low dielectric loss and good thermal stability of BaTiO 3 -bi(Mg 0.5 Zr 0.5 )O 3 solid solution

High-Temperature Capacitor Materials Based on Modified BaTiO3

Nb-doped 0.9 BaTiO 3-0.1(Bi 0.5Na 0.5) TiO 3ceramics with stable dielectric properties at high temperature

High-temperature dielectrics in CaZrO3-modified Bi1/2Na1/2TiO3-based lead-free ceramics

Nb‐Modified 0.9batio3–0.1(bi0.5na0.5)tio3 Ceramics for X9R High‐Temperature Dielectrics Application Prepared by Coating Method

Microstructure and dielectric properties of BaTiO3-Nb 2O5-Zn0.8Mg0.2TiO3 ternary system

Effects of ZnO and CeO 2 Additions on the Microstructure and Dielectric Properties of Mn-modified (bi 0.5 Na 0.5 ) 0.88 Ca 0.12 TiO 3 Ceramics

High-temperature stable dielectrics in Mn-modified (1-x) BiNaTiO-xCaTiO ceramics

High Temperature Dielectric Stable (1-X) [(na0.5bi0.5)0.92ba0.08]0.955la0.03tio3 -Xnanbo3 System with Ultra-Low Dielectric Loss Range Through Optimizing the Defect Chemistry

Nb-Doped 0 . 8 BaTiO 3-0 . 2 Bi ( Mg 0 . 5 Ti 0 . 5 ) O 3 Ceramics with Stable Dielectric Properties at High Temperature

Effects of Ca and Mn Additions on the Microstructure and Dielectric Properties of (bi0.5na0.5)tio3 Ceramics

Effects of Binbo4 and Nb2O5 additions on the temperature stability of modified BaTiO3

TEMPERATURE-INDEPENDENT DIELECTRIC PROPERTIES OF 0.82[0.94bi0.5na0.5tio3–0.06batio3]–0.18k0.5na0.5nbo3 CERAMICS

High-temperature dielectric properties of Bi0.5Na0.5TiO3–NaNbO3–Sr0.8Na0.4Nb2O6 ceramics

Unveiling High Resistivity Mechanism in (0.8-X)batio3-0.2bisco3-x(bi0.5li0.5)tio3 Ceramics with Good Dielectric Temperature-Stability

High-Temperature Capacitor Based on Ca-Doped Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub> Ceramics

Reducing Dielectric Loss in Na0.5Bi0.5TiO3 Based High Temperature Capacitor Material

High Permittivity and Excellent High‐temperature Energy Storage Properties of X9R BaTiO3–(Bi0.5Na0.5)TiO3 Ceramics