Abstract:The emission of nitrogen oxides (NO x ) from the coal-fired power plants poses a huge threat to human health and natural environment. The selective catalytic reduction of NO x with NH3 (SCR) has been proven to be a mature technology for the abatement of NO x . To be the crucial component, the performance of the catalysts plays a determined role during the deNO x process. Fe2O3-based catalysts, as one of the most effective catalysts for SCR, have been comprehensively researched and fruitful results are achieved. Therefore, the advances in the applications of Fe2O3-based catalysts for NO x reduction was overviewed in this work. Simply put, the fundamentals of Fe2O3, such as this metal oxide's crystal structures and the corresponding preparation methods, were first introduced. After that, the physicochemical features and deNO x performances of various catalysts, including virgin Fe2O3, Fe2O3-supported, and Fe2O3-containing mixed oxide systems, were summarized. Considering the variable flue gas conditions in coal-fired power plants, the effects of the typical components of SO2, HCl, H2O, and fly ash on the catalyst's NO x reduction activity were also evaluated and the results demonstrated that with proper modification, catalyst flue gas component adaptability could be availably improved. Furthermore, the possible NO x reduction pathways over the Fe2O3-based catalysts under various conditions were discussed with the key intermediates and the rate-controlling stages clarified. Finally, suggestions were raised that attention needed to be concentrated on developing new Fe2O3-based catalysts that was capable of stably operating in real coal-fired flue gas in following research.

Numerical Simulation of SCR of NOx with NH3 on Fe-based Catalyst

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Selective Catalytic Reduction of NOx with NH3 over Short-Range Ordered W-O-Fe Structures with High Thermal Stability

Modeling and Performance Analysis of SCR DeNOx Catalyst for Reducing NOx Emissions in Diesel Engine

Insight into the Dynamic Behaviors of Reactants with Temperature over a TiOx-based Catalyst for NOx Removal Via NH3-SCR

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Numerical Simulation of Selective Catalytic Reduction of NO and SO2 Oxidation in Monolith Catalyst

Toward an Atomic-Level Understanding of the Catalytic Mechanism of Selective Catalytic Reduction of NOx with NH3

Optimization of Robust FeMnSmO x Catalyst for Low-Temperature (<150 °C) NH 3 –SCR of NO x

Selective Catalytic Reduction of NO by NH3 on Fe, Mn-based Catalysts

CFD analysis of influencing factors on SCR denitration efficiency of sintering flue gas based on response surface methodology

Toward an Atomic-Level Understanding of the Catalytic Mechanism of Selective Catalytic Reduction of NO x with NH 3

Experimental and Density Functional Theory Studies on the Zeolite-Based Fe–Ni–W Trimetallic Catalyst for High-Temperature NOx Selective Catalytic Reduction: Identification of Active Sites Suppressing Ammonia Over-oxidation

NO Selective Catalytic Reduction over Atom-Pair Active Sites Accelerated Via in Situ NO Oxidation

Novel FeVO4 catalyst modified with NbTiOx for efficient selective catalytic reduction of NOx with NH3

Recent advancements in Fe-based catalysts for the efficient reduction of NOx by CO

Efficient FeMn/Al2O3 catalyst for NH3-SCR of NO at low temperature: the Influence of Strong Interactions Between Active Components and Carrier

The development of Fe2O3-based catalysts used for the selective catalytic reduction of NO with NH3: A review

Insight into highly efficient FeOx catalysts for the selective catalytic reduction of NOx by NH3: Experimental and DFT study

Simultaneous Selective Catalytic Reduction of NO and N2O by NH3 over Fe-Zeolite Catalysts