Abstract:This paper investigates the characteristics of selective catalytic reduction (SCR) with a V 2 O 5 -WO 3 /TiO 2 catalyst by studying the key parameters and determining a method for controlling ammonia injection with a sample test bench. Four parameters are defined and adopted to represent the characteristics of nitrogen oxides (NO x ) and the ammonia reaction. The effects of NH 3 /NO x ratio (NSR), catalyst temperature, and ammonia injection period on NO x conversion efficiency and ammonia slip are investigated. The correlation between ammonia slip and ammonia saturation storage level is studied. The experimental results show that the ammonia saturation storage level has a great impact on NO x reduction and ammonia slip. The NO x conversion efficiency and ammonia slip strongly depend on the ammonia saturation storage level. Under such conditions, the NO x conversion efficiency is best when the ammonia saturation storage level is 68.2~73%, and the value reaches 75% before ammonia slip. Pulse injection improves the NO x conversion efficiency and limits ammonia slip. Comprehensive comparison shows that the injected ratio of NH 3 /NO x is first larger and then smaller than is beneficial for the rapid improvement of NO x conversion efficiency; the appropriate NH 3 /NO x ratio and continuous injection time must be controlled, or it is easy to cause ammonia slip. Therefore, a control algorithm based on ammonia storage saturation level has been proposed. According to the difference between the actual value of ammonia storage saturation and the target value, the controller corrects the injection of urea to achieve control of ammonia storage saturation level. The period of pulse injection has little influence on the mean value of NO x at the outlet; however, it affects the peak level of NO x and ammonia slip. Using varied period pulse injection further improves the NO x conversion efficiency and restrains ammonia slip. The outlet level of NO x can be reduced by adopting a suitable ammonia pulse injection interval.

Modeling and Performance Analysis of SCR DeNOx Catalyst for Reducing NOx Emissions in Diesel Engine

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Numerical Simulation of SCR of NOx with NH 3

Numerical Simulation of SCR of NOx with NH3 on Fe-based Catalyst

Establishment and Validation of the Model for SCR DeNOx Catalytic Reaction

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Determination of Chemical Kinetic Parameters for Adsorption and Desorption of NH3 in Cu-Zeolite Used as a DeNOx SCR Catalyst of Diesel Engines

Physical and Chemical Process Model of SCR and Its Verification

Modelling of Selective Catalytic Reduction of NOx with NH3 over the Fe-Cu/ZSM-5 Catalyst

Reaction Mechanism and Chemical Kinetics of NH3-NO/NO2-SCR System with Vanadium-Based Catalyst under Marine Diesel Exhaust Conditions

Experimental Study on Activity and Kinetics of Served SCR Catalysts

Experimental Demonstration of NO Reduction and Ammonia Slip for Diesel Engine SCR System

Experimental demonstration of NOx reduction and ammonia slip for diesel engine SCR system

Study On The Preparation And Performance Properties Of Scr Deno(X) Catalyst

Experimental demonstration of NO x reduction and ammonia slip for diesel engine SCR system

Tuning the Standard SCR Reaction Kinetics to Model NO Conversion in a Diesel Engine Exhaust SCR Catalyst System Under Steady State Conditions in 1D and 3D Geometries Using Ammonia Gas as the Reductant

The research on dynamic performance of single channel selective catalytic reduction system with different shapes

Kinetics analysis of catalytic processes for marine diesel Urea-SCR system

Experimental and kinetic study of low temperature selective catalytic reduction of NO with NH3 over the V2O5/AC catalyst

Influence of Non-uniform Distributions of Inlet Velocity and Reductant on SCR DeNOx Performance

Study on Catalytic Activity and Kinetics of Urea-SCR Processes for NOx Removal from a Marine Diesel Exhaust Flow