Abstract:Two series of Cu/SSZ-13 catalysts were synthesized via aqueous solution and solid-state ion exchange using SSZ-13 supports of varying Si/Al ratios. The isolated and multinuclear Cu content of these catalysts were determined by H 2 temperature programmed reduction (H 2 -TPR). Multinuclear Cu in these catalysts, including in situ Cu-dimers formed from ZCu II OH coupling and permanent CuO clusters, are active species for dry NO oxidation. NH 3 oxidation on these catalysts follows an internal SCR (i-SCR) mechanism, i.e., a portion of NH 3 is first oxidized to NO, then NO is selectively reduced by the remaining NH 3 to N 2 . NH 3 oxidation displays distinct kinetic behavior below ~300 °C and above ~400 °C. At low temperature the results indicate that NH 3 -solvated mobile Cu-ions are the active centers. CuO clusters, when present, also contribute to the low temperature activity by catalyzing NH 3 oxidation to NO. At high temperature, in situ Cu-dimers and CuO clusters catalyze NH 3 oxidation to NO, and isolated Cu-ions catalyze SCR to realize the cascade turnovers. For both NO and NH 3 oxidation, Cu-dimers balanced by framework charges of close proximity appear to be more active than Cu-dimers balanced by distant framework charges. However, the former Cu-dimers are less stable than the latter and tend to split into monomers in the presence of vicinal Brønsted acid sites. Via density functional theory (DFT) calculations, the i-SCR mechanism for low temperature NH 3 oxidation, i.e., the energetic favorability for the involvement of the NO intermediate, is justified. The DFT results also agree with experimental data that the formation of Cu-dimers from ZCu II OH dimerization is essential for NH 3 oxidation at high temperature.

Mechanism-Based Kinetic Modeling of N2o Formation on Scr Activity over Cu-Ssz-13 Catalysts for Diesel Vehicle

Ammonia Dynamic Modelling over Cu-SSZ-13 Catalyst for NOx Emission Control in Diesel Vehicles

Modeling and Analysis of Ammonia Oxidation and Nitrous Oxide Formation on a Dual-Layer Ammonia Slip Catalyst for Diesel After-Treatment

Experimental Investigation on N2O Formation During the Selective Catalytic Reduction of NOx with NH3 over Cu-SSZ-13

Mechanisms and Site Requirements for NO and NH 3 oxidation on Cu/SSZ-13

Selective Catalytic Reduction of NOx with NH3 over Cu/SSZ-13: Elucidating Dynamics of Cu Active Sites with in Situ UV–Vis Spectroscopy and DFT Calculations

N2O Formation Mechanism During Low-Temperature NH3-SCR over Cu-SSZ-13 Catalysts with Different Cu Loadings

Identification of Active Sites and Reaction Mechanism on Low-Temperature SCR Activity over Cu-SSZ-13 Catalysts Prepared by Different Methods

Mechanistic Insights into the Enhanced Low-Temperature Activity of Cu-SSZ-13 by MnOx-CeO2 Modification for Standard SCR Reaction and Fast SCR Reactions

Oxidation State of Copper Species Rather Than Ammonium Nitrate Decomposition Determines the N2O Generation During NO Reduction with NH3 on Cu-AEI Catalyst

Oxidation state of copper species rather than ammonium nitrate decomposition determines the N 2 O generation during NO reduction with NH 3 on Cu-AEI catalyst

Urea-related Reactions and Their Active Sites over Cu-SAPO-34: Formation of NH3 and Conversion of HNCO

Modeling and Performance Analysis of SCR DeNOx Catalyst for Reducing NOx Emissions in Diesel Engine

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Basic understanding of Cu‐SSZ‐13 in catalyzing low‐temperature selective catalytic reduction of NOx by ammonia

Computational and Spectroscopic Characterization of Key Intermediates of the Selective Catalytic Reduction Cycle of NO on Zeolite-Supported Cu Catalyst

Reaction Pathways of Standard and Fast Selective Catalytic Reduction over Cu-SSZ-39

Spatial Distribution of Brønsted Acid Sites Determines the Mobility of Reactive Cu Ions in the Cu-SSZ-13 Catalyst during the Selective Catalytic Reduction of NOx with NH3

Recent NH 3 -SCR Mechanism Research over Cu/SAPO-34 Catalyst

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Understanding Enhancement of Strong Copper-Yttrium Interactions on Catalytic Properties of Cu/Y-SSZ-13 for NH3-SCR