Abstract:(Fe3-xMnx)(1-delta)O-4 was synthesized using a co-precipitation method and then developed as a catalyst for the low temperature selective catalytic reduction (SCR) of NO with NH3. The SCR activity of (Fe3-xMnx)(1-delta)O-4 was clearly enhanced with the increase of Mn content. The results of in situ DRIFTS study demonstrated that both the Eley-Rideal mechanism (i.e. reaction of activated ammonia with gaseous NO) and the Langmuir-Hinshelwood mechanism (i.e. reaction of adsorbed ammonia species with adsorbed NOx species) might happen during the SCR reaction over (Fe3-xMnx)(1-delta)O-4. According to the kinetic analysis, the respective contribution of the Langmuir-Hinshelwood mechanism and the Eley-Rideal mechanism on the SCR reaction was studied. Only the adsorption of NO + O-2 on (Fe2.8Mn0.2)(1-delta)O-4 was promoted, so the Langmuir-Hinshelwood mechanism predominated over NO conversion on (Fe2.8Mn0.2)(1-delta)O-4 especially at lower temperatures. Both the adsorption of NO + O-2 and the adsorption of NH3 on (Fe2.5Mn0.5)(1-delta)O-4 were obviously promoted, so NO conversion on (Fe2.5Mn0.5)(1-delta)O-4 mainly followed the Eley-Rideal mechanism especially at higher temperatures. Both the nitrate route and the over-oxidization of adsorbed ammonia species contributed to the formation of N2O on (Fe2.8Mn0.2)(1-delta)O-4 above 140 degrees C. However, the formation of N2O on (Fe2.5Mn0.5)(1-delta)O-4 mainly resulted from the over-oxidization of adsorbed ammonia species. Although the activity of (Fe2.5Mn0.5)(1-delta)O-4 was suppressed in the presence of H2O and SO2. the deactivated catalyst can be regenerated after the water washing. (C) 2011 Elsevier B.V. All rights reserved.

Selective Catalytic Reduction of NO by NH3 on Fe, Mn-based Catalysts

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

VxMn(4-x)Mo3Ce3/Ti catalysts for selective catalytic reduction of NO by NH3

Highly efficient NH3-SCR of NO over MnFeW/Ti catalyst at low temperature: SO2 tolerance and reaction mechanism

Selective Catalytic Removal of High Concentrations of NOx at Low Temperature

Low Temperature Selective Catalytic Reduction Of No With Nh3 Over Mn-Fe Spinel: Performance, Mechanism And Kinetic Study

Low-temperature selective catalytic reduction of NO on MnOx/TiO2 prepared by different methods

Substitution of WO3in V2O5/WO3–TiO2by Fe2O3for Selective Catalytic Reduction of NO with NH3

The Role of NH_3 in the Low-Temperature Selective Catalytic Reduction of NO over MnO_x/TiO_2

Fe and Mn mixed oxide catalysts supported on Sn-modified TiO 2 for the selective catalytic reduction of NO with NH 3 at low temperature

The role of NH3 in the low-temperature selective catalytic reduction of NO over MnOx/TiO2

Enhanced Catalytic Performance of V2O5–WO3/Fe2O3/TiO2microspheres for Selective Catalytic Reduction of NO by NH3

NH3-SCR Performance of Mn-Fe/TiO2 Catalysts at Low Temperature in the Absence and Presence of Water Vapor

Optimizing Selective Catalytic Reduction of NO with NH3 on Fe2O3/WO3 Via Redox‐Acid Synergy

Selective catalytic reduction of NO with NH3 over novel iron–tungsten mixed oxide catalyst in a broad temperature range

Low Temperature Selective Catalytic Reduction of NOx with NH3 over Amorphous MnOx Catalysts Prepared by Three Methods

Selective catalytic reduction of NOx with NH3 by monolithic catalyst MnOx/AC/C under low temperature in the presence of excess O2

Highly dispersed V2O5/TiO2 modified with transition metals (Cu, Fe, Mn, Co) as efficient catalysts for the selective reduction of NO with NH3

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Enhanced Hydrothermal Stability of a Manganese Metavanadate Catalyst Based on WO3–TiO2 for the Selective Catalytic Reduction of NOx with NH3

Improvement of sulfur and water resistance with Fe-modified S-MnCoCe/Ti/Si catalyst for low-temperature selective catalytic reduction of NO with NH3