Abstract:Ductile iron pipes are widely used in pipe manufacturing for water and sewage transmission and distribution. In pipeline standards such as EN545, the pipe material is assumed isotropic and its mechanical properties are determined by tensile testing of round bars extracted along the longitudinal direction. This study experimentally examined the mechanical properties of centrifugal casting ductile iron pipes, focusing on the effects of sampling orientation, location, preparation, and test methodology. A ring hoop tension test (RHTT) was designed to evaluate circumferential properties. Force analysis of RHTT was performed and theoretical equation was derived to quantify the friction coefficient that existed between the coupon specimen and the loading fixture. A numerical study was conducted to further validate the effectiveness of the proposed theory. The test results indicated that the pipe mechanical property was inhomogeneous across the wall thickness, being inferior in the internal section and superior in the middle and external sections. This inferior layer would develop crack first and lead to subsequent outward propagation. This phenomenon led to a substantial degradation in the overall mechanical performance of the entire specimens, in comparison to the material in the middle portion. The material exhibited better performance in the circumferential direction compared to the longitudinal direction in terms of its mechanical properties, such as tensile strength and ductility. Flattened specimens showed enhanced strength and reduced ductility compared to the base pipe material. Fractographic and metallographic analyses revealed the existence of casting defects of porosity and agglomerated graphite in the internal section, which were the primary cause of material inhomogeneity. The round bars suggested per EN545 tended to overestimate the actual mechanical behaviour of ductile iron pipes, and may not be a true representation of the finished product of pipes. Flattened specimens as per ASTM E8/E8M were not recommended for ductile iron pipe material assessment, as the flattening process altered the stress–strain characteristics significantly.

Electrochemical and Microscopic Study on Corrosion Characteristics of Cement-Mortar-Lined Ductile Iron Pipe in Flowing Solutions

Corrosion Mechanisms of Ductile Iron Pipes in Water Distribution System: Impacts of Ionic Strength and Cement Mortar Lining Coverage

Effects of Chloride and Humic Acid on Iron Release in Water Distribution System

Influence Factors of Initial Internal Corrosion of Grey Cast Iron Pipes in Water Distribution System

Study on Iron Release with Various Blending of Desalinated Water and Tap Water

Corrosion behavior and mechanism of ductile iron with different degrees of deterioration of cement mortar lining in reclaimed water pipelines

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Understanding the initial use stage of cement mortar lining in drinking water distribution systems: Silicon and aluminum as stability indicators

Failure analysis in buried ductile iron pipelines: A study of leakage in drinking water distribution systems

Characteristics of Iron Corrosion Scales and Water Quality Variations in Drinking Water Distribution Systems of Different Pipe Materials.

Analysis of Water Quality Change in Reclaimed Water Conveyed in Cement Mortar Lined Iron Pipe

Early Period Corrosion and Scaling Characteristics of Ductile Iron Pipe for Ground Water Supply with Sodium Hypochlorite Disinfection.

Effects of Disinfectant and Biofilm on the Corrosion of Cast Iron Pipes in a Reclaimed Water Distribution System

Microbial activity involvement on soil corrosion of ductile iron – Electrochemical & microscopic study

Electrochemical Investigation of the Corrosion of Different Microstructural Phases of X65 Pipeline Steel under Saturated Carbon Dioxide Conditions

Corrosion Behavior of AISI 316L Stainless Steel Used as Inner Lining of Bimetallic Pipe in a Seawater Environment

Effect of Tempered Martensite and Ferrite/Bainite on Corrosion Behavior of Low Alloy Steel Used for Flexible Pipe Exposed to High-Temperature Brine Environment

Manganese Release from Corrosion Products of Cast Iron Pipes in Drinking Water Distribution Systems: Effect of Water Temperature, Ph, Alkalinity, SO42- Concentration and Disinfectants

Inhomogeneity in mechanical properties of ductile iron pipes: A comprehensive analysis

Corrosion behaviors of arc spraying single and double layer coatings in simulated Dagang soil solution

Physico-chemical Characteristics of Corrosion Scales from Different Pipes in Drinking Water Distribution Systems