A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting
Chenkang Xue,Ruijie Xi,Huipeng Xu,Lijie Shao,Xu Yang,Yong Ding,Wuhua Li,Wanyuan Qu
DOI: https://doi.org/10.1109/tcsi.2024.3383425
2024-01-01
IEEE Transactions on Circuits and Systems I Regular Papers
Abstract:This article presents a novel Dickson hybrid boost converter for thermoelectric energy harvesting that utilizes a fixed ratio switched-capacitor (SC) converter combined with a traditional switched-inductor design. This unique approach makes high conversion ratio (CR) more attainable. Besides, the converter features an on-chip LC oscillator for cold-starting the harvester without requiring any external components. To improve the efficiency of the harvester, a lookup table-based maximum power point tracking (MPPT) and a zero current detection (ZCD) circuit are also implemented. The prototype was designed and fabricated using the 55 nm low power (LP) CMOS process, with a compact 5.6- mu H inductor. Measurement results verify that the harvester can cold start at an open-circuit voltage ofV (TG) = 110mV, achieve a peak efficiency of 90.5% atV (TG) = 140mV, and maintain operation at a 5-mV input voltage with a 200-nA load. Furthermore, the converter maintains end-to-end efficiencies above 80% for a wide range ofV (TG) = 40 similar to 200mV. With a wide input range of 5 similar to 100mV and load range of 200nA similar to 4.52mA, the proposed converter represents a significant improvement in performance over previous state-of-the-art designs, with a decent power efficiency, compact form factor and wide output power range.