Abstract:In this paper, the breaking process of the vacuum circuit breakers is briefly described, and the main factors that influence the post-arc process are analyzed. Based on the detachable vacuum interrupter, the experimental platform of AC breaking is built, and the experiments of the post-arc current measurement and cathode spot observation are completed. The voltage and current during the period of current zero are measured, and the images of cathode spots during the arcing process are obtained. The experimental results show that at the same frequency, the post-arc current I-pac and the post-arc charge Q(pac) increase with the increase in<mml:mfrac>d id t</mml:mfrac>cz(<mml:mfrac>d id t</mml:mfrac> at current zero). Under the same conditions of<mml:mfrac>d id t</mml:mfrac>cz, I-pac and Q(pac) decrease with the increase in frequency, but both are unchanged with frequency when the frequency is high enough. With the increase in current frequency, the distribution diameter of cathode spots decreases under the condition of the same<mml:mfrac>d id t</mml:mfrac>cz value. According to the characteristics of cathode spot distribution, the metal vapor density under different conditions is calculated. Comparing the calculation results of metal vapor with the experimental results of post-arc current, the concept of metal vapor ionization is put forward. An ionization process of metal vapor after the current zero crossing occurs. The ionization of metal vapor will cause an increase in the number of electrons after the current zero crossing, which affects I-pac, Q(pac), and sheath growth.

Experiment Research Of Post-Arc Current And Cathode Spots Distribution In Medium-High Frequency Vacuum Arc

Experimental Research of Post-Arc Currents in Vacuum Circuit Breakers

Research on the current-zero period of vacuum arc interruption and equivalent model of post-arc gap

Study on the Dynamic Characteristics of Plasma in the Post-arc Process of Vacuum Arc Interrupting

Study on the Effect of Metal Vapor on the Post-Arc Process in Vacuum Arc with High Di/dt Condition

Research on the Postarc Sheath Growth Process Considering the Plasma Motion and Distribution

Experimental Investigation on the Postarc Current in Vacuum Circuit Breakers and the Influence of Arcing Memory Effect

Experimental Investigation on the Velocity of Cathode Spots in a Vacuum Arc with High Di/dt

Post-arc Current Measurement and Interruption Performance of Vacuum Interrupter in DC Interruption

Study on the Proportions of Charged Particles Absorbed by Post-Arc Anode in the Post-Arc Phase of a Vacuum Circuit Breaker

Experimental Investigations on the Post-Arc Current of the Vacuum Circuit Breaker in an Active Mechanical DC Circuit Breaker

Investigation of the Dielectric Recovery Process of Vacuum Arc in Double Breaks by Planar Laser-Induced Fluorescence

Research On Post-Arc Reignition Phenomena For 40.5kv Vacuum Interrupter

Investigation of Vacuum Arc Extinction Process by Planar Laser-Induced Fluorescence

Experimental Study on Arcing Process of Vacuum Arc under Wan-Type Contacts

The Effect and Dynamic Behavior of Particles in High-Current Vacuum Arc Interruptions

Two-Dimensional Particle-in-Cell/Monte Carlo Collisional Simulation of the Post-Arc Breakdown in Vacuum Circuit Breakers

3D Transient MHD Simulation of DC Breaking Vacuum Arc Based on Artificial Current Zero

Experimental Investigation on Vacuum Arc Behaviors Subjected to Larger Diameter Cup-Shaped and Coil-Shaped Axial Magnetic Field Electrode

Experimental Investigation of Vacuum Arc under Different Axial Magnetic Field Contacts for 40.5 Kv Vacuum Interrupters

Experimental investigation on the evolution of vacuum arc in the quench protection switch based on forced current zero