Abstract:In this paper, the breaking process of the vacuum circuit breakers is briefly described, and the main factors that influence the post-arc process are analyzed. Based on the detachable vacuum interrupter, the experimental platform of AC breaking is built, and the experiments of the post-arc current measurement and cathode spot observation are completed. The voltage and current during the period of current zero are measured, and the images of cathode spots during the arcing process are obtained. The experimental results show that at the same frequency, the post-arc current I-pac and the post-arc charge Q(pac) increase with the increase in<mml:mfrac>d id t</mml:mfrac>cz(<mml:mfrac>d id t</mml:mfrac> at current zero). Under the same conditions of<mml:mfrac>d id t</mml:mfrac>cz, I-pac and Q(pac) decrease with the increase in frequency, but both are unchanged with frequency when the frequency is high enough. With the increase in current frequency, the distribution diameter of cathode spots decreases under the condition of the same<mml:mfrac>d id t</mml:mfrac>cz value. According to the characteristics of cathode spot distribution, the metal vapor density under different conditions is calculated. Comparing the calculation results of metal vapor with the experimental results of post-arc current, the concept of metal vapor ionization is put forward. An ionization process of metal vapor after the current zero crossing occurs. The ionization of metal vapor will cause an increase in the number of electrons after the current zero crossing, which affects I-pac, Q(pac), and sheath growth.

Experimental Investigation on the Postarc Current in Vacuum Circuit Breakers and the Influence of Arcing Memory Effect

Experimental Research of Post-Arc Currents in Vacuum Circuit Breakers

Experimental Investigations on the Post-Arc Current of the Vacuum Circuit Breaker in an Active Mechanical DC Circuit Breaker

Investigation on the current-zero characteristic of vacuum circuit breakers

Experiment Research Of Post-Arc Current And Cathode Spots Distribution In Medium-High Frequency Vacuum Arc

Post-arc current simulation based on measurement in vacuum circuit breaker with a one-dimensional particle-in-cell model

Experimental Study on the Influence of Different Opening Speed on Post-Arc Current in DCCB

Post-arc Current Measurement and Interruption Performance of Vacuum Interrupter in DC Interruption

Experimental Study on Arcing Process of Vacuum Arc under Wan-Type Contacts

Research On Post-Arc Reignition Phenomena For 40.5kv Vacuum Interrupter

Investigation of Arc Characteristics of a DC Vacuum Circuit Breaker With Double-Break Under Asynchronous Interrupting

Study on the Proportions of Charged Particles Absorbed by Post-Arc Anode in the Post-Arc Phase of a Vacuum Circuit Breaker

Experimental investigation and simulation of vacuum arc under axial magnetic field: A review

Experimental investigation on the characteristic and voltage of low-current vacuum arc in vacuum OLTC

Experimental Study of Arc Modes in Vacuum Interrupter with Inserted Electrodes

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Study on Dielectric Recovery Characteristic of Vacuum Interrupter after High Frequency Interruption

Study on the Effect of Metal Vapor on the Post-Arc Process in Vacuum Arc with High Di/dt Condition

Investigation of the Dielectric Recovery Process of Vacuum Arc in Double Breaks by Planar Laser-Induced Fluorescence

Experimental Investigation on Vacuum Arc Behaviors Subjected to Larger Diameter Cup-Shaped and Coil-Shaped Axial Magnetic Field Electrode

Optical Diagnostics of Vacuum Arc in the process of DC Interruption