Abstract:Since vacuum circuit breakers gradually advanced to higher voltage levels, axial magnetic field (AMF) contacts have drawn a great deal of attention due to their excellent breaking ability. The cup-type AMF contact is a common kind of AMF contact, which has much potential in contact design and application of high voltage grade systems due to the advantages of strong structural strength, uniform magnetic field distribution, lower resistance, etc. This study analyzes the arcing characteristics of a cup-type AMF contact with a large slotted rotation angle at various diameter-to-gap ratios (DGRs). The arcing process is divided into five stages as follows: initial diffusion, contracting, fully constricted, re-diffusion, and extinguished. Arc self-rotation and anode separation phenomena in the re-diffusion stage appear when the DGR is 58/24. The reasons for these occurrences were discussed and explained with regard to the magnetic field vector's spatial distribution. The duration of each stage and the current threshold of a fully constricted arc will both differ with the change of the DGR. The structural parameters of the fully constricted arc were computed through the method of imaging the luminous intensity distribution after the arc was fully constricted. The source of the change in the arc voltage can be seen in the variation of arc structural parameters, which also reflect anode activity intensity to a certain extent. The transient magnetic field simulation method was used to explain why the arc under the same instantaneous current shows variable morphology at the extinguished stage and contracting stage in one arcing process. The research results presented in the article can be used as a reference for developing high-voltage cup-type AMF contacts.

Experimental Investigation on the Velocity of Cathode Spots in a Vacuum Arc with High Di/dt

Study on cathode spot expansion process in vacuum arc with high di/dt

Dynamic Characteristics of Cathode Spots During Expansion Process in a Vacuum Arc

Experiment Research Of Post-Arc Current And Cathode Spots Distribution In Medium-High Frequency Vacuum Arc

Investigation of Cathode Spot Characteristics in Vacuum under Transverse Magnetic Field (TMF) Contacts

Experimental investigation on the expansion speed of cathode spots in high-current triggered vacuum arc

Optical Diagnostics of Vacuum Arc in the process of DC Interruption

The motion and distribution characteristics of cathode spot and its influence on plasma parameters

Experimental Investigation on Vacuum Arc Behaviors Subjected to Larger Diameter Cup-Shaped and Coil-Shaped Axial Magnetic Field Electrode

Experimental investigation on the dynamic of cathode spot of vacuum arc in external transverse magnetic field

Study on the Effect of Metal Vapor on the Post-Arc Process in Vacuum Arc with High Di/dt Condition

Influence of AMF on the Expansion Speed of Cathode Spots in High-Current Triggered Vacuum Arc

Experimental Study and Characteristic Analysis of Vacuum Arc Between Cup-Type Axial Magnetic Contacts under Different Diameter-to-gap Ratios

Influence of Oscillating Frequency of External Transverse Magnetic Field on DC Vacuum Arc Evolution

Investigation of the Dielectric Recovery Process of Vacuum Arc in Double Breaks by Planar Laser-Induced Fluorescence

Experimental Investigations on the Post-Arc Current of the Vacuum Circuit Breaker in an Active Mechanical DC Circuit Breaker

Investigation of Unstable Motion Characteristics of Vacuum Arc Cathode Spots Between Transverse Magnetic Field Contacts

Experimental Investigation of High-Current Vacuum Arc Instability Modes under Transverse Magnetic Field

The Initial Expansion Process in Triggered Vacuum Arc under Different Axial Magnetic Field Distributions

Design of Opening Velocity for a Vacuum Interrupter With a Cup-type Axial Magnetic Field Contact Based on Vacuum Arc Anode Discharge Mode

The Discharge Development and Arc Modes in Vacuum at A Long Gap Distance in Vacuum Interrupters