Abstract:In this paper, the breaking process of the vacuum circuit breakers is briefly described, and the main factors that influence the post-arc process are analyzed. Based on the detachable vacuum interrupter, the experimental platform of AC breaking is built, and the experiments of the post-arc current measurement and cathode spot observation are completed. The voltage and current during the period of current zero are measured, and the images of cathode spots during the arcing process are obtained. The experimental results show that at the same frequency, the post-arc current I-pac and the post-arc charge Q(pac) increase with the increase in<mml:mfrac>d id t</mml:mfrac>cz(<mml:mfrac>d id t</mml:mfrac> at current zero). Under the same conditions of<mml:mfrac>d id t</mml:mfrac>cz, I-pac and Q(pac) decrease with the increase in frequency, but both are unchanged with frequency when the frequency is high enough. With the increase in current frequency, the distribution diameter of cathode spots decreases under the condition of the same<mml:mfrac>d id t</mml:mfrac>cz value. According to the characteristics of cathode spot distribution, the metal vapor density under different conditions is calculated. Comparing the calculation results of metal vapor with the experimental results of post-arc current, the concept of metal vapor ionization is put forward. An ionization process of metal vapor after the current zero crossing occurs. The ionization of metal vapor will cause an increase in the number of electrons after the current zero crossing, which affects I-pac, Q(pac), and sheath growth.

Experimental investigation on the evolution of vacuum arc in the quench protection switch based on forced current zero

Experimental investigation on "glow flow" phenomenon during current-zero period between transverse magnetic contacts

Experimental investigation on the characteristic and voltage of low-current vacuum arc in vacuum OLTC

Experimental investigation on the characteristics of vacuum arc in the process of DC interruption based on artificial current zero

Experimental Investigation on the Characteristics of Drawn Vacuum Arc in Initial Expanding Stage and in Forced Current-Zero Stage

Experimental Investigation on the Interruption Performance of Vacuum Interrupters With AMF and TMF Contacts in a Quench Protection Switch

DC Interruption Performance of Vacuum Interrupters in a Quench Protection Switch Based on Forced Current Zero

Experimental Investigation on the Interruption Performance of Vacuum Interrupters in a Quench Protection Switch

Experimental Investigation on the Second Commutation Process of a Quench Protection Switch

Experiment Research Of Post-Arc Current And Cathode Spots Distribution In Medium-High Frequency Vacuum Arc

Experimental Research on the Characteristics of Low-Current Vacuum Arc in Vacuum OLTC

Experimental Investigation on Vacuum Arc Behaviors Subjected to Larger Diameter Cup-Shaped and Coil-Shaped Axial Magnetic Field Electrode

Experimental Investigation on Initial Arc Formation in High-Current Drawn Vacuum Arc

Research on the current-zero period of vacuum arc interruption and equivalent model of post-arc gap

Experimental Investigation on Transition Characteristics of Arcing Stages under Transverse Magnetic Field

Researches on Spectrums and Macroscopic Forms of DC Arc in a Short Air Gap

Experimental Investigation of High-Current Vacuum Arc Instability Modes under Transverse Magnetic Field

Model and Simulation Investigation of the Whole Process of High-Current Vacuum Arc Burning

3D Transient MHD Simulation of DC Breaking Vacuum Arc Based on Artificial Current Zero

Experimental Investigation of Vacuum Arc under Different Axial Magnetic Field Contacts for 40.5 Kv Vacuum Interrupters

Investigation of Unstable Motion Characteristics of Vacuum Arc Cathode Spots Between Transverse Magnetic Field Contacts