Abstract:Kraft lignin (KL), which is largely obtained from Kraft pulping process, is typically utilized to generate steam, electricity, and heat. The huge amount of KL can also be utilized for various purposes such as producing biofuels, chemicals, and materials. In this work, industrial waste KL was used to prepare activated carbons (ACs) with high surface area and large pore volume via KOH activation method. The effects of pretreatment methods of KL, activation methods, and activation conditions on the pore structures and the yield of ACs were investigated. The prepared ACs were characterized by XRD, SEM, FTIR, and N-2 adsorption at -196(degrees)C. The results showed that the pore structure and the yield of ACs were closely related to the various pretreatment methods, activation methods, and conditions. A 26% carbon yield of AC with the maximum BET surface area of 2762.5 m(2)/g and pore volume of 1.32 cm(3)/g was obtained under the following activation condition (a) KOH to acid pretreatment KL mass ratio of 4, (b) activation temperature of 750(degrees)C, (c) activation duration of 2 h, and (d) N-2 flow rate of 160 cm(3)/min. The activating agent KOH can be recovered partially and the washing water discharge can also be minimized by reuse process. (c) 2013 American Institute of Chemical Engineers Environ Prog, 33: 519-526, 2014

Optimization of the Preparation Conditions of KOH-activated, PAN-based Carbon Ellipsoids by Orthogonal Experimental Analysis

Optimal Activation of Porous Carbon for High Performance CO2 Capture

Facile, Low-Cost, and Sustainable Preparation of Hierarchical Porous Carbons from Ion Exchange Resin: an Improved Potassium Activation Strategy

Preparation and characterization of porous carbons from PAN-based preoxidized cloth by KOH activation

COMPARISONS OF CHEMICAL PROPERTIES AND PORE STRUCTURE OF CARBONS ACTIVATED BY KOH AND NaOH

INFLUENCE OF DIFFERENT CHEMICAL REAGENTS ON THE PREP-ARATION OF ACTIVATED CARBONS FROM ANTHRACITE

Optimization of high surface area activated carbon production from Enteromorpha prolifra with low-dose activating agent

Preparation And Characterization Of Activated Carbon From Kraft Lignin Via Koh Activation

COMPARISONS OF PORE STRUCTURE AND ELECTROCHEMICAL PERFORMANCES OF CARBONS ACTIVATED BY KOH AND NaOH

Preparation and performance of coal-based activated carbon based on an orthogonal experimental study

Preparation and Characterization of Activated Carbons Based Alkali Lignin by KOH Chemical Activation

Study of Microstructure of High-Surface-Area Polyacrylonitrile Activated Carbon Fibers.

Study on Pan-Based Activated Carbon Fiber Prepared by Different Activation Methods

Preparation of High Surface Area Activated Carbons from Luffa Cylindrical Sponge by KOH Activation

Orthogonal experimental study on activated carbon from biomass hydrolysis residues activated by carbon dioxide

Preparation and Electrochemical Performance of Orange Peel Based-Activated Carbons Activated by Different Activators

Preparation of high specific surface area activated carbon from walnut shells by microwave-induced KOH activation

Preparation of high-surface-area activated carbons from coconut shell

Effect of Pre-Carbonization of Petroleum Cokes on Chemical Activation Process with KOH

Preparation and Characterization of High Specific Surface Area Activated Carbon from Bamboo by Chemical Activation with KOH

DEVELOPMENT OF SURFACE AREA AND PORE STRUCTURE OF CARBON ADSORBENT WITH LARGE SURFACE AREA