Abstract:Over the past decade, the production of biofuels from lignocellulosic biomass has steadily increased to offset the use of fuels from petroleum. To make biofuels cost-competitive, however, it is necessary to add value to the "ligno-" components (up to 30% by mass) of the biomass. The properties of lignin, in terms of molecular weight (MW), chemical functionality, and mineral impurities often vary from biomass source and biorefinery process, resulting in a challenging precursor for product development. Activated carbon (AC) is a feasible target for the lignin-rich byproduct streams because it can be made from nearly any biomass, and it has a market capacity large enough to use much of the lignin generated from the biorefineries. However, it is not known how the variability in the lignin affects the key properties of AC, because, until now, they could not be well controlled. In this work, various fractions of ultraclean (<0.6% ash) lignin are created with refined MW distributions using Aqueous Lignin Purification using Hot Agents (ALPHA) and used as precursors for AC. AC is synthesized via zinc chloride activation and characterized for pore structure and adsorption capacity. We show that AC surface area and the adsorption capacity increase when using lignin with increasing MW, and, furthermore, that reducing the mineral content of lignin can significantly enhance the AC properties. The surface area of the AC from the highest MW lignin can reach ~1830 m2/g (absorption capacity). Furthermore, single step activation carbonization using zinc chloride allows for minimal carbon burn off (<30%), capturing most of the lignin carbon compared to traditional burn off methods in biorefineries for heat generation.

Preparation and Characterization of Activated Carbons Based Alkali Lignin by KOH Chemical Activation

Preparation And Characterization Of Activated Carbon From Kraft Lignin Via Koh Activation

KOH Activation Mechanism in the Preparation of Brewer's Spent Grain-Based Activated Carbons

Preparation of High-Surface-Area Activated Carbon from Coconut Shell Fibers

Tailored mesoporous structures of lignin-derived nano-carbons for multiple applications

The Role of Lignin Molecular Weight on Activated Carbon Pore Structure

Optimization of the Preparation Conditions of KOH-activated, PAN-based Carbon Ellipsoids by Orthogonal Experimental Analysis

Preparation of high specific surface area activated carbon from walnut shells by microwave-induced KOH activation

Preparation of High Specific Surface Area Activated Carbon from Petroleum Coke by KOH Activation in a Rotary Kiln

Physicochemical and adsorption characteristics of activated carbons from cellulose, xylan and lignin

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Characterization and analysis of activated carbons prepared from furfural residues by microwave-assisted pyrolysis and activation

Orthogonal experimental study on activated carbon from biomass hydrolysis residues activated by carbon dioxide

Preparation of High Specific Surface Area and High Adsorptive Activated Carbon by KOH Activation

STUDY ON PREPARATION OF COAL-BASED ACTIVATED CARBONS BY NaOH ACTIVATION

Effect of Alkali and 1,4-Butanediol Contents on the Extraction of Lignin and Lignin-Based Activated Carbon

Effect of Co-solution of Carbon Precursor and Activating Agent on the Textural Properties of Highly Porous Activated Carbon Obtained by Chemical Activation of Lignin With H3PO4

Comparative studies of porous carbon nanofibers by various activation methods

Dye Removal of Activated Carbons Prepared from NaOH-pretreated Rice Husks by Low-Temperature Solution-Processed Carbonization and H3PO4 Activation

Physical and chemical properties of carbons synthesized from xylan, cellulose, and Kraft lignin by H3PO4 activation

Sodium-lignosulfonate derived activated carbon: an investigation into the role of NaOH in the activation mechanism