Abstract:The feasibility of biomass-based activated carbons has received a huge attention due to their excellent characteristics such as inexpensiveness, good adsorption behaviour and potential to reduce a strong dependency towards non-renewable precursors. Therefore, in this research work, eco-friendly activated carbon from palm kernel shell that has been produced from one-stage physical activation by using the Box-Behnken design of Response Surface Methodology is highlighted. The effect of three input parameters—temperature, dwell time and gas flow rate—towards product yield and carbon dioxide (CO2) uptake at room temperature and atmospheric pressure are studied. Model accuracy has been evaluated through the ANOVA analysis and lack-of-fit test. Accordingly, the optimum condition in synthesising the activated carbon with adequate CO2 adsorption capacity of 2.13 mmol/g and product yield of 25.15 wt% is found at a temperature of 850 °C, holding time of 60 min and CO2 flow rate of 450 cm3/min. The synthesised activated carbon has been characterised by diverse analytical instruments including thermogravimetric analyser, scanning electron microscope, as well as N2 adsorption-desorption isotherm. The characterisation analysis indicates that the synthesised activated carbon has higher textural characteristics and porosity, together with better thermal stability and carbon content as compared to pristine palm kernel shell. Activated carbon production via one-step activation approach is economical since its carbon yield is within the industrial target, whereas CO2 uptake is comparable to the synthesised activated carbon from conventional dual-stage activation, commercial activated carbon and other published data from literature.

Synthesis and Characterization of Green Porous Carbons with Large Surface Area by Two Step Chemical Activation with KOH

Synthesis and Characterization of Bio-Based Porous Carbons by Two Step Physical Activation with CO2

Facile, Low-Cost, and Sustainable Preparation of Hierarchical Porous Carbons from Ion Exchange Resin: an Improved Potassium Activation Strategy

Synthesis and characterization of porous activated carbons derived from lotus nut and their performance for CO2 adsorption

Effects of Preparation and Activation Manner on Surface Area of Hierarchical Porous Carbons Derived from Nut (euryale Ferox) Shell

Production of palm kernel shell-based activated carbon by direct physical activation for carbon dioxide adsorption

Catalytic performance of porous carbons obtained by chemical activation

Development of Uniform Porous Carbons From Polycarbazole Phthalonitriles as Durable CO2 Adsorbent and Supercapacitor Electrodes

Synthesis and characterization of a high surface area activated carbon derived from cassava peels waste by KOH activation

Carbon Dioxide Adsorption by a High-Surface-Area Activated Charcoal

Preparation and characterization of porous carbons from PAN-based preoxidized cloth by KOH activation

CO2 Adsorption at Nitrogen-Doped Carbons Prepared by K2CO3 Activation of Urea-Modified Coconut Shell

Preparation of High-Surface-Area Activated Carbon from Coconut Shell Fibers

High-surface-area porous carbons produced by the mild KOH activation of a chitosan hydrochar and their CO2 capture

Almond Skin Derived Porous Biocarbon Nanoarchitectonics with Tunable Micro and Mesoporosity for CO 2 Adsorption and Supercapacitors

Preparation of High Surface Area Activated Carbons from Luffa Cylindrical Sponge by KOH Activation

One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance

Crosslinked hydrogel-derived carbons activated by trace amounts of aqueous potassium carbonate for carbon dioxide adsorption

Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation

Study of the Enhancements of Porous Structures of Activated Carbons Produced from Durian Husk Wastes

Optimization of the Preparation Conditions of KOH-activated, PAN-based Carbon Ellipsoids by Orthogonal Experimental Analysis