Abstract:In this work, hydrothermal technique combined with KOH activation were employed to develop a series of porous carbons (NPCK-x) using tobacco stem as a low-cost carbon source and (NH4)2C2O4 as a novel nitrogen-doping agent. Physicochemical properties of NPCK-x were characterized by Brunauer-Emmett-Teller, field emission scanning electron microscopy, X-ray diffraction, Raman microscope, elemental analysis, and X-ray photoelectron spectroscopy. Results showed that the NPCK-x samples possessed large surface areas (maximum: 2875 m2/g), hierarchical porous structures, and high degree of disorder. N-containing functional groups decomposed during activation process, which could be the dominant reason for appearance of abundant mesopores and well-developed pore structure. Dynamic chlorobenzene adsorption experiments demonstrated that carbon materials with (NH4)2C2O4 modification exhibited higher adsorption capacity (maximum: 1053 mg/g) than those without modification (maximum: 723 mg/g). The reusability studies of chlorobenzene indicated that the desorption efficiency of (NH4)2C2O4 modified porous carbon reached 90.40% after thermal desorption at 100°C under N2 atmosphere. Thomas model fitting results exhibited that the existence of mesopores accelerated the diffusion rate of chlorobenzene in porous carbon. Moreover, Grand Canonical Monte Carlo simulation was conducted to verify that micropores with pore sizes of 1.2-2 nm of the optimized porous carbon were the best adsorption sites for chlorobenzene and mesopores with pore sizes of 2-5 nm were also highly active sites for chlorobenzene adsorption.

Catalytic performance of porous carbons obtained by chemical activation

Facile, Low-Cost, and Sustainable Preparation of Hierarchical Porous Carbons from Ion Exchange Resin: an Improved Potassium Activation Strategy

Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation

Preparation and characterization of porous carbons from PAN-based preoxidized cloth by KOH activation

COMPARISONS OF PORE STRUCTURE AND ELECTROCHEMICAL PERFORMANCES OF CARBONS ACTIVATED BY KOH AND NaOH

Synthesis and Characterization of Green Porous Carbons with Large Surface Area by Two Step Chemical Activation with KOH

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

COMPARISONS OF CHEMICAL PROPERTIES AND PORE STRUCTURE OF CARBONS ACTIVATED BY KOH AND NaOH

Preparation of high specific surface area activated carbon from walnut shells by microwave-induced KOH activation

Effects of raw material texture and activation manner on surface area of porous carbons derived from biomass resources.

Mechanism of Biomass Activation and Ammonia Modification for Nitrogen-Doped Porous Carbon Materials.

Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation

THE STUDY OF PHENOLIC RESIN-BASED MESOPORE ACTIVATED CARBON WITH SUPERHIGH SPECIFIC SURFACE AREA

Synthesis and characterization of porous activated carbons derived from lotus nut and their performance for CO2 adsorption

Optimization of the Preparation Conditions of KOH-activated, PAN-based Carbon Ellipsoids by Orthogonal Experimental Analysis

Nitrogen-Doped Porous Carbons Through Koh Activation with Superior Performance in Supercapacitors

Porous Graphitic Carbons Prepared by Combining Chemical Activation with Catalytic Graphitization

Effects of Preparation and Activation Manner on Surface Area of Hierarchical Porous Carbons Derived from Nut (euryale Ferox) Shell

Synthesis of hierarchical porous carbon with high surface area by chemical activation of (NH4)2C2O4 modified hydrochar for chlorobenzene adsorption

INFLUENCE OF DIFFERENT CHEMICAL REAGENTS ON THE PREP-ARATION OF ACTIVATED CARBONS FROM ANTHRACITE

Influence Of Coal Preoxidation On The Porosity Of The Activated Carbons With Steam Activation