Abstract:As the most commonly used method for industrial activated carbon preparation, physical activation is usually accompanied by significant loss of raw materials, especially when the pore structure of activated carbon is well developed. This not only reduces yields, but also increases costs. To enhance both yield and pore structure of activated carbon, we proposed a facile and scalable method called "fast pyrolysis-physical activation". After fast pyrolysis, although the initial pore volume of the semi-coke decreases, the rapid release of volatiles promotes the increase of mesopore and macropore volumes and the development of micron-scale cracks, which is beneficial for CO2 mass transfer and reduces diffusion resistance. Therefore, compared to slow pyrolysis, the activated carbon produced through this method has a higher pore volume (increased by 25.9 %-30.0 %) and a larger SBET (increased by 26.7 %-38.3 %), while the yield remains almost unchanged. Consequently, due to the increase in pore volume and high yield of the activated carbon, the CO2 adsorption capacity (25 degrees C, 1 bar) of ACB-K700 increases from 2.02 mmol/g to 2.37 mmol/g compared to ACB-M700, and the total CO2 adsorption capacity of activated carbon prepared from the same mass of raw coal (1 g) increases from 1.07 mmol to 1.16 mmol. Due to the pre-formed pores inside the semi-coke, the gas activator molecules are able to penetrate deep into the particles, which not only reduces the ineffective etching that occurs on the surface, but also promotes the development of pore structure. In conclusion, this study provides a new pore development model for physical activation, and also provides a new method to produce activated carbon rapidly and massively, while the pore structure is well developed.

Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation

Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation

Efficiently treating waste nylon-tire to prepare sulfur and nitrogen doped porous carbon material via pyrolysis and activation

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Preparation and Electrochemical Properties of PF-based Activated Carbon

Efficient Production of Activated Carbon with Well-Developed Pore Structure Based on Fast Pyrolysis-Physical Activation

Sustainable Development of Tyre Char-Based Activated Carbons with Different Textural Properties for Value-Added Applications.

CHARACTERIZATIONS AND ACTIVATION STUDY OF CHAR FROM PYROLYSIS OF USED TIRES

Properties of Pyrolytic Chars and Activated Carbons Derived from Pilot-Scale Pyrolysis of Used Tires

A comparison of hydrothermal carbonization versus pyrolysis-activation for sludge-derived carbon materials on physiochemical properties and electrochemical performance

Preparation of Nitrogen-containing Activated Carbon from Waste Medium Density Fiberboard for Electric Double Layer Capacitor

Activated coke preparation by physical activation of coal and biomass co-carbonized chars

Preparation of activated carbon through the pyrolysis of waste bamboo chips and evaluation of its CO2 adsorption efficacy

Synthesis of carbon nanotubes and porous carbons from printed circuit board waste pyrolysis oil.

Porous biochar production from microwave pyrolysis of sugarcane bagasse biomass with KOH addition

Physical and chemical properties of carbons synthesized from xylan, cellulose, and Kraft lignin by H3PO4 activation

Conversion of Pyrolytic Chars from Used Tires to Activated Carbon

Effect of Two-Stage Process on the Preparation and Characterization of Porous Carbon Composite from Rice Husk by Phosphoric Acid Activation

Characterization of Pyrolytic Char after Chemical Activation

Sustainable production of porous carbon from biomass: Influence of pre-carbonization on pore evolution and environment impact

Preparation of Activated Carbon from the Residue of Plasma Pyrolysis of Coal by Steam Activation