Abstract:Bamboo is found worldwide but is especially concentrated in tropical and subtropical areas with the major producing nations being China, Indonesia and Thailand with an annual production of 12 million tonnes. It has found uses in many applications such as: furniture, flooring, roofing, fencing, interior design and scaffolding in the construction industry. In this study, discarded waste bamboo furniture was used in the ground form as the raw material feedstock for the production of a series of biochars and activated carbons. The biochars were produced at different temperatures, namely, 723, 823, 923, 1,023, 1,123 and 1223 K, in a muffle furnace inerted with nitrogen and for different pyrolysis times. The product chars yields were 20–30% by weight of the raw material, surface areas were 100–350 m 2 /g. Other tests include elemental analysis, helium displacement density, pH, ICP-AES on a leachate sample. Four of the different temperature samples of biochar were used to adsorb the basic dye methylene blue and were shown to possess high adsorption capacities. Then, the same bamboo raw material powder was treated with acid and pyrolysed/activated in a nitrogen atmosphere at the same range of temperatures to produce activated carbons; these were characterized using similar test methods to the biochars. The yields are in the range 20–40% by weight of the raw material feedstock and the BET surface areas are in the range 200–600 m 2 /g. Three of the different temperature activated carbons were used to adsorb methylene blue and the results were compared with the biochar results. All the adsorption experimental isotherm results were analyzed using conventional isotherm equations. The benefits and cost implications of both biochar and activated carbon routes are discussed. The methylene blue adsorption capacities are extremely attractive in the range 0.42–1.12 mmol/g (150–300 mg/g char product) and extend to over 2.35 mmol/g (700 mg/g) for the bamboo derived activated carbons. The micropore and mesopore volumes have been determined under the various char and activated carbon experimental conditions and coupled with the surface areas; these results have been used to explain the trends in the methylene blue adsorption capacities.

Preparation of activated carbon through the pyrolysis of waste bamboo chips and evaluation of its CO2 adsorption efficacy

Comprehensive Analysis of Biochar-Based Co2 Capture

The Application of Biochar for CO<sub>2</sub> Capture: Influence of Biochar Preparation and CO<sub>2</sub> Capture Reactors

Char Products From Bamboo Waste Pyrolysis and Acid Activation

A High Adsorption Capacity Bamboo Biochar for CO2 Capture for Low Temperature Heat Utilization

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Comprehending adsorption of methylethylketone and toluene and microwave regeneration effectiveness for beaded activated carbon derived from recycled waste bamboo tar

Biomass-Based Activated Carbon and Activators: Preparation of Activated Carbon from Corncob by Chemical Activation with Biomass Pyrolysis Liquids

Porous biochar production from microwave pyrolysis of sugarcane bagasse biomass with KOH addition

Green synthesis of porous bamboo-based activated carbon with high VOCs adsorption performance via steam activation method

Optimized preparation of multi-matrix activated carbon for CO 2 capture by response surface methodology: The advantages of co-pyrolysis of biomass and plastics

Single-step preparation of activated carbons from pine wood, olive stones and nutshells by KOH and microwaves: Influence of ultra-microporous for high CO 2 capture

Granular Bamboo-Derived Activated Carbon for High CO(2) Adsorption: the Dominant Role of Narrow Micropores.

Enhancing graphitization with desirable porosity for CO 2 adsorption through a one-step strategy and a novel stepwise pyrolysis method from Terminalia boivinii tul tree dead leaves

Systematic study of dynamic CO2 adsorption on activated carbons derived from different biomass

Insights into CO2 adsorption on KOH-activated biochars derived from the mixed sewage sludge and pine sawdust

Renewable biochar derived from mixed sewage sludge and pine sawdust for carbon dioxide capture

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Highly porous carbon derived from hydrothermal-pyrolysis synergistic carbonization of biomass for enhanced CO 2 capture

Monophenols recovery by catalytic pyrolysis of waste sawdust over activated biochar from the brown macroalage Hizikia fusiformis : Mechanism and life-cycle assessment

Microwave vacuum pyrolysis rapidly transforms bamboo into solid biofuel: Predicting fuel performances by response surface methodology