Abstract:The 2.5D packaging technology is a high–performance method for electronic packaging. This study addresses the reliability issues of 2.5D packaging during the manufacturing process. A multi–physics field coupling Finite Element Method (FEM) has been developed, combined with sub–modeling techniques, to investigate the curing of underfill adhesive, the curing of Epoxy Molding Compound (EMC), and the reflow soldering between the interposer and substrate in a 2.5D packaging entity during various manufacturing procedures. The focus is on the thermo–mechanical–chemical behavior of viscoelastic components within the packaging structure, as well as the viscoplastic characteristics of the micro solder balls and microbumps. A systematic analysis is conducted on the warpage deformation and stress distribution of the 2.5D packaging at crucial time points. The results demonstrate that after curing, the overall warpage of the packaging exhibits a 'concave' warpage profile. Additionally, as the thickness of the EMC above the chip increases, the warpage value of the packaging also increases. The warpage value defined by linear elasticity is larger than that defined by viscoelasticity. The maximum Von Mises stress value in the key areas of the submodel is greater than the maximum Von Mises stress value in the corresponding key areas of the global model. After reflow soldering, the stress concentration in the micro solder balls occurs at the edge of the micro solder ball array. The maximum stress values for each component of the packaging are observed in the interface areas between the components. Packaging components that undergo the curing process have notably higher warpage and Von Mises stress values than those that do not undergo the curing process. The simulation method established in this study can accurately predict the warpage deformation and stress distribution state of 2.5D packaging, providing significant engineering application value for process optimization and reliability enhancement of 2.5D packaging in the production process.

Research on Vibration Reliability of System in Package

Dynamic Substructure Method for Prediction of Solder Joint Reliability of IC Package under Drop Test

A Review of System-in-Package Technologies: Application and Reliability of Advanced Packaging

Finite Element Simulation on Packaging of Hinged High-G Micromachined Accelerometer

Vibration and Drop Analysis of 3d Sip with Through Silicon Via

Failure and Failure Characterization of QFP Package Interconnect Structure under Random Vibration Condition.

Study of Package-on-Package Solder Joints under Random Vibration Load Based on Patran

Three-dimension Finite Element Simulation for a PCB Assembly under Random Vibration Loading

Modal Analysis Of Board-Level Electronic Package

Finite element analysis of 2.5D packaging processes based on multi-physics field coupling for predicting the reliability of IC components

Package and board level reliability modeling of advanced CSP pakages for telecommunication applications

Design and Reliability Analysis of Spaceborne Microsystem SiP

Board-Level Drop Impact Reliability Analysis of Dual-Side Molding System-in- Package (SiP) Modules

Printed-Circuit Board Model Establishment and Solder Joint Failure Analysis

Random Vibration Reliability of BGA Lead-Free Solder Joint

Fatigue Prediction of Electronic Packages Subjected to Random Vibrations

A Semi-Analytical Approach for System-Level Electrical Modeling of Electronic Packages with Large Number of Vias

Numerical Simulation of Reliability of 2.5D/3D Package Interconnect Structure under Temperature Cyclic Load

Numerical Simulation of Random Vibration for Electrical Connectors

The investigation of board-level vibration for the stacked memory device

SMT solder joint's semi-experimental fatigue model