Abstract:Facile surface micro/nanostructuring techniques for additively-manufactured (AM) aluminum alloy (AlSi10Mg) have recently been developed. The structuring techniques are not only highly scalable, but they also enable the tailoring of structure length scale and morphology to enhance pool boiling heat transfer coefficient. Our past study revealed that the structure cavity size of 5 μm is favorable for bubble nucleation during pool boiling of dielectric fluid, HFE-7100, resulting in significant enhancements in the heat transfer coefficients ( h ). However, owing to the differences in thermophysical properties between different coolant fluids, including saturation temperature, latent heat of vaporization and surface tension, the required structure size range for bubble nucleation and capillary wicking force for liquid re-supply are expected to differ significantly. To explore the effect of structure length scale on the pool boiling performance of coolants with different thermophysical properties, this work develops a new surface structuring technique consisting of a dual-stage metallurgic heat treatment process and single-stage crystallographic etching process to tune the structure length scale across nearly two orders of magnitude, viz. , from 0.3 to 15 μm. Using coolant media of vastly different thermophysical properties, i.e., dielectric fluid HFE-7100 and deionized water, we show that while microcavities with sizes ranging from 3 to 8 μm are favorable bubble nucleation sites for boiling of HFE-7100, which result in the enhancement of the maximum heat transfer coefficient ( h max ) by 83.4 to 103.8 % as compared to a conventional plain Al6061 surface, larger microcavity sizes of 10 to 15 μm are required to effectively promote bubble nucleation of water. This large microcavity size range of 10 to 15 μm, produced through rational nanoparticle agglomeration of the rich Si-phase in AM AlSi10Mg in elevated temperature, followed by an indirect removal process using a chemical process, is found to significantly increase h max of water by up to 259.9 % as compared to conventional nanostructures formed on Al6061. In addition, the new AM structured surfaces also exhibit up to 26.6 % enhancement in critical heat flux (CHF) as compared to highly-wicking conventional nanostructured Al6061. In summary, by utilizing scalable fabrication techniques to tailor the structure length scale on AM AlSi10Mg, this work not only reveals the favorable microcavity sizes for bubble nucleation of different coolant fluids to enhance boiling, but it also provides useful micro/nanostructure design guidelines that can be adopted to enhance boiling of other coolants and phase change applications.

Pool Boiling Performance of 3D-Printed Reentrant Microchannels Structures

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Enhanced pool boiling heat transfer during quenching on micro/nanostructured wicking surface: effects of submicron-scale substructures

Pool boiling enhancement of novel interconnected microchannels with reentrant cavities for high-power electronics cooling

Pool boiling heat transfer and bubble dynamics over V-shaped microchannels and micropyramids: Does high aspect ratio always benefit boiling?

Pool boiling heat transfer of dual-scale porous microchannel for high-power electronics cooling

A review on fabrication and pool boiling enhancement of three-dimensional complex structures

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

The synergistic effect of micro/nanostructure length scale and fluid thermophysical properties on pool boiling heat transfer

Pool Boiling Performance of Multilayer Micromeshes for Commercial High-Power Cooling

Enhanced pool boiling on micro-nano composited surfaces with nanostructures on micro-pin-fins

Silicon microchannels flow boiling enhanced via microporous decorated sidewalls

Achieving robust and enhanced pool boiling heat transfer using micro–nano multiscale structures

High-frequency Alternating Nucleate Boiling of Water Enabled by Microslot Arrays in Microchannels

Multiscale hybrid surface structure modifications for enhanced pool boiling heat transfer: State-of-the-art review

Experimental and parametric study in pool boiling enhancement with self-induced jet impingement on the microporous copper surface using R1336mzz(Z)

Pool boiling inside micro-nano composite pores: Thermofluids behaviors and heat transfer enhancement

Experimental study of flow boiling performance of open-ring pin fin microchannels

Experimental investigation of flow boiling characteristics in microchannel with triangular cavities and rectangular fins

Boiling performance enhancement and self-recovery of nucleate boiling regime on micro- and nanostructured porous surfaces

A review on flow boiling enhancement and fabrication of enhanced microchannels of microchannel heat sinks